DS90LV011AQ Datasheet, PDF (1/6 Pages) National Semiconductor (TI) – Automotive LVDS Differential Driver

August 8, 2008
DS90LV011AQ
Automotive LVDS Differential Driver
General Description
The DS90LV011AQ is an LVDS driver optimized for high data
rate and low power applications. The DS90LV011AQ is a cur-
rent mode driver allowing power dissipation to remain low
even at high frequency. In addition, the short circuit fault cur-
rent is also minimized. The device is designed to support data
rates in excess of 400Mbps (200MHz) utilizing Low Voltage
Differential Signaling (LVDS) technology.
The device is offered in a 5-lead small outline transistor pack-
age. The LVDS outputs have been arranged for easy PCB
layout. The differential driver outputs provide low EMI with its
typical low output swing of 350 mV. The DS90LV011AQ can
be paired with its companion single line receiver, the
DS90LT012AQ, or with any of National's LVDS receivers, to
provide a high-speed LVDS interface.
Features
■ ^{AECQ-100 Grade 3}
■ ^{Conforms to TIA/EIA-644-A Standard}
■ ^{>400Mbps (200MHz) switching rates}
■ ^{700 ps (100 ps typical) maximum differential skew}
■ ^{1.5 ns maximum propagation delay}
■ ^{Single 3.3V power supply}
■ ^{±350 mV differential signaling}
■ ^{Power Off Protection (outputs in TRI-STATE)}
■ ^{Pinout simplifies PCB layout}
■ ^{Low power dissipation (23 mW @ 3.3V typical)}
■ ^{SOT-23 5-lead package}
■ ^{Pin compatible with SN65LVDS1}
Connection Diagram
Functional Diagram
30063822
(Top View)
Order Number DS90LV011AQMF
See NS Package Number MF05A
30063802
© 2008 National Semiconductor Corporation 300638
www.national.com