DS90LV011A Datasheet, PDF (1/6 Pages) National Semiconductor (TI) – 3V LVDS Single High Speed Differential Driver

May 2002
DS90LV011A
3V LVDS Single High Speed Differential Driver
General Description
The DS90LV011A is a single LVDS driver device optimized
for high data rate and low power applications. The
DS90LV011A is a current mode driver allowing power dissi-
pation to remain low even at high frequency. In addition, the
short circuit fault current is also minimized. The device is
designed to support data rates in excess of 400Mbps
(200MHz) utilizing Low Voltage Differential Signaling (LVDS)
technology.
The device is in both a 5-lead small outline transistor pack-
age and a new LLP-8 package with a 3mm x 3mm body size.
The LVDS outputs have been arranged for easy PCB layout.
The differential driver outputs provide low EMI with its typical
low output swing of 350 mV. The DS90LV011A can be paired
with its companion single line receiver, the DS90LV012A, or
with any of National’s LVDS receivers, to provide a high-
speed LVDS interface.
Features
n Conforms to TIA/EIA-644-A Standard
n >400Mbps (200MHz) switching rates
n 700 ps (100 ps typical) maximum differential skew
n 1.5 ns maximum propagation delay
n Single 3.3V power supply
n ±350 mV differential signaling
n Power Off Protection (outputs in TRI-STATE)
n Pinout simplifies PCB layout
n Low power dissipation (23 mW @ 3.3V typical)
n SOT-23 5-lead package
n Leadless LLP-8 package (3x3 mm body size)
n SOT-23 version pin compatible with SN65LVDS1
n Fabricated with advanced CMOS process technology
n Industrial temperature operating range
(−40˚C to +85˚C)
Connection Diagrams
20014922
(Top View)
Order Number DS90LV011ATMF
See NS Package Number MF05A
Functional Diagram
20014923
(Top View)
Order Number DS90LV011ATLD
See NS Package Number LDA08A
© 2002 National Semiconductor Corporation DS200149
20014902
www.national.com