ADC0831 Datasheet, PDF (1/33 Pages) National Semiconductor (TI) – 8-Bit Serial I/O A/D Converters with Multiplexer Options

July 2002
ADC0831/ADC0832/ADC0834/ADC0838
8-Bit Serial I/O A/D Converters with Multiplexer Options
General Description
The ADC0831 series are 8-bit successive approximation A/D
converters with a serial I/O and configurable input multiplex-
ers with up to 8 channels. The serial I/O is configured to
comply with the NSC MICROWIRE™ serial data exchange
standard for easy interface to the COPS™ family of proces-
sors, and can interface with standard shift registers or µPs.
The 2-, 4- or 8-channel multiplexers are software configured
for single-ended or differential inputs as well as channel
assignment.
The differential analog voltage input allows increasing the
common-mode rejection and offsetting the analog zero input
voltage value. In addition, the voltage reference input can be
adjusted to allow encoding any smaller analog voltage span
to the full 8 bits of resolution.
Features
n NSC MICROWIRE compatible — direct interface to
COPS family processors
n Easy interface to all microprocessors, or operates
“stand-alone”
n Operates ratiometrically or with 5 V_DC voltage reference
n No zero or full-scale adjust required
n 2-, 4- or 8-channel multiplexer options with address logic
n Shunt regulator allows operation with high voltage
supplies
n 0V to 5V input range with single 5V power supply
n Remote operation with serial digital data link
n TTL/MOS input/output compatible
n 0.3" standard width, 8-, 14- or 20-pin DIP package
n 20 Pin Molded Chip Carrier Package (ADC0838 only)
n Surface-Mount Package
Key Specifications
n Resolution
n Total Unadjusted Error
n Single Supply
n Low Power
n Conversion Time
8 Bits
±¹â„2 LSB and ±1 LSB
5 V_DC
15 mW
32 µs
Typical Application
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
COPS™ and MICROWIRE™ are trademarks of National Semiconductor Corporation.
© 2002 National Semiconductor Corporation DS005583
00558301
www.national.com