CF5019 Datasheet, PDF (8/12 Pages) Nippon Precision Circuits Inc – High-Frequency, 3rd Overtone Crystal Oscillator Module ICs

CF5019 series
CF5019ALC, CF5019ALD, CF5019ALE
2.5V operation
V_DD = 2.25 to 2.75V, V_SS = 0V, Ta = −40 to +85°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
t_r1 Measurement cct 3, load cct 1, 0.1V_DD to 0.9V_DD, C_L = 15pF
–
Output fall time
t_f1 Measurement cct 3, load cct 1, 0.9V_DD to 0.1V_DD, C_L = 15pF
–
Output duty cycle^*1
Duty1
Measurement cct 3, load cct 1, V_DD = 2.5V, Ta = 25°C,
C_L = 15pF, f = 155MHz
45
Output disable delay time^*2 t_{PLZ Measurement cct 6, load cct 1, VDD = 2.5V, Ta = 25°C,}
–
Output enable delay time^*2 t_PZL ^{CL = 15pF}
–
1
3
ns
1
3
ns
–
55
%
–
100
ns
–
100
ns
*1. The duty cycle characteristic is checked the sample chips of each production lot.
*2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
3V operation
V_DD = 2.7 to 3.6V, V_SS = 0V, Ta = −40 to +85°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
t_{r1 Measurement cct 3, load cct 1,}
t_r2
0.1V_DD to 0.9V_DD
C_L = 15pF
C_L = 30pF
–
1
2.5
ns
–
1.5
4
ns
Output fall time
t_{f1 Measurement cct 3, load cct 1,}
t_f2
0.9V_DD to 0.1V_DD
C_L = 15pF
C_L = 30pF
–
1
2.5
ns
–
1.5
4
ns
Output duty cycle^*1
Duty1
Duty2
Measurement cct 3, load cct 1,
V_DD = 3.0V, Ta = 25°C
C_L = 15pF, f = 170MHz 45
C_L = 30pF, f = 125MHz 45
Output disable delay time^*2 t_{PLZ Measurement cct 6, load cct 1, VDD = 3.0V, Ta = 25°C,}
–
Output enable delay time^*2 t_PZL ^{CL = 15pF}
–
–
55
%
–
55
%
–
100
ns
–
100
ns
*1. The duty cycle characteristic is checked the sample chips of each production lot.
*2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
SEIKO NPC CORPORATION —8