FP0115CAC1BC-C2 Datasheet, PDF (5/5 Pages) Nihon Kaiheiki Industry Co. Ltd. – Contactless Pushbuttons

Contactless Pushbuttons Series FP01
EXTERNAL PLUG OPTIONS
C2
AT021
Assembled Connector Plug
with Wire Leads
Connector plug body: JST model ZHR-6
Crimp connector pins: JST model SZH-002T-P0.5
Wire leads: 28-26AWG; 12-inch, unstripped;
Blue for Pin 1
C3
AT022
Unassembled Connector Plug
and Pins
1 connector plug and 8 crimp connector
pins only (no wire leads provided).
Matching wire leads: 28-26AWG
No Code
No Connector Plug
Recommended connector
plug for assembly:
JST model number ZHR-6
Recommended crimp
connector pins:
JST model SZH-002T-P0.5
for 28-26AWG wire leads
or SZH-003T-P0.5 for
32-28AWG wire leads.
TYPICAL SWITCH DIMENSIONS
(5.0)
NKK P/N
.197
This Side
Pin 1
(1.1)R Typ
.043
(25.1)
.988
FP0115CAC1FF
LM
(19.6) Dia
.772
(26.0) Dia
1.024
(1.5)
.059
(5.3)
(21.4)
.209
.843
(2.3)
(22.8) Dia
.091
.898
65432 1
Terminal Connector Detail
(22.9) Dia
.902
Recommended Panel
Thickness Range:
.098” ~ .197”
(2.5mm ~ 5.0mm)
LEGENDS
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory
or utilize the general information and basic specifications presented below.
ALERT
Suggested Printable Area for FP01 Cap
Recommended Methods:
Pad Print or Laser Etch on cap.
Epoxy based ink is recommended.
(16.56) Dia
.475
(19.6) Dia
.772
(1.52) Typ
.060
Shaded area is printable area.
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com 03-07