LP0115CCKW015CB Datasheet, PDF (4/6 Pages) Nihon Kaiheiki Industry Co. Ltd. – Short Body Pushbuttons

Short Body Pushbuttons
Series LP01
MOUNTING TYPES
C _Bushing
M _Snap-in
.630” (16.0mm) Diameter
.669” (17.0mm) Diameter
This mounting option is supplied
with a brass hexagon nut with nickel plating.
Recommended
Panel Thickness:
.079” ~ .256”
(2.0mm ~ 6.5mm)
(16.0)^+–
0.2
0.0
Dia
.630
(1.7)
+
–
0.0
0.1
.067
(7.5)
+
–
0.1
0.0
.295
(25.0) Min
.984
Allow .984” (25.0mm) distance from center-to-center
between switches when mounted side-by-side.
Recommended
Panel Thickness:
.039” ~ .126”
(1.0mm ~ 3.2mm)
(18.1)
+
–
0.2
0.0
.713
(21.0) Min
.827
(1.1)
+
–
0.2
0.0
R
.043
(17.3)
+
–
0.2
0.0
Dia
.681
D
Allow .827” (21.0mm) distance from center-to-center
between switches when mounted side-by-side.
HOUSING
K _Black
Housing available in black only. The one-piece body and bezel have a matte finish.
CONTACT MATERIALS, RATINGS, & TERMINALS
W01
Silver
Power Level
Solder Lug/
.110” (2.8mm) Quick Connect
3A @ 125V AC/250V AC; 3A @ 30V DC
Note: If used at 1A @ 125V AC/250V AC or 1A @ 30V DC,
electrical life will be 100,000 operations minimum.
Epoxy Seal
(7.3)
.287
(2.0)
.079
(2.8)
.110
(0.6) R
.024
(1.2)
.047
Thk = (0.5)
.020
LED COLORS & SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is isolated and requires external power source. Polarity marks are on the switch.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement section.
LEDs are an
integral part
of the switch
and are not
available
separately.
Single Color LED with 1 Element
(+)
(-)
Forward Peak Current
Continuous Forward Current
Forward Voltage
Reverse Peak Voltage
Current Reduction Rate Above 25°C
Ambient Temperature Range
Colors
I_FM
I_F
V_F
V_RM
∆I_F
5C
Red
30mA
20mA
1.95V
5V
0.41mA/°C
5D
Amber
30mA
20mA
2.0V
5V
0.29mA/°C
–10°C ~ +50°C
5F
Green
30mA
20mA
2.1V
5V
0.39mA/°C
No Code _{No Lamp}
w w w.nkk.com
D69