LP0115CCKW015CB Datasheet, PDF (1/6 Pages) Nihon Kaiheiki Industry Co. Ltd. – Short Body Pushbuttons

Series LP01
Short Body Pushbuttons
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
Other Ratings
Contact Resistance:
Insulation Resistance:
D
Dielectric Strength:

Mechanical Life:
Electrical Life:

Nominal Operating Force:
Contact Timing:
Travel:
50 milliohms maximum
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts and case for 1 minute minimum
500,000 operations minimum
50,000 operations minimum for 3A @ 125V/250V AC & 3A @ 30V DC
100,000 operations minimum for 1A @ 125V/250V AC & 1A @ 30V DC
1.5N for Single Pole; 3.0N for Double Pole
Nonshorting (break-before-make)
Total Travel .118” (3.0mm)
Materials & Finishes
Actuator:
Housing:

Base:
Movable Contact:
Stationary Contacts:

Lamp Terminals:
Polycarbonate
Bushing mount: Glass fiber reinforced polyamide (UL94V-0);
Snap in mount: Polyphenylene ether (UL94V-0)
Diallyl phthalate (UL94V-0)
Phosphor bronze & silver with silver plating
Common terminal: Phosphor bronze with silver plating;
Contact terminals: Phosphor bronze with tin & copper plating
Phospher bronze with tin and copper plating
Environmental Data
Operating Temperature Range:

Humidity:
Vibration:

Shock:
–10°C through +50°C (+14°F through +122°F) for Illuminated
–25°C through +70°C (+13°F through +158°F) for Nonilluminated
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s²) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Mounting Torque:
Soldering Time & Temperature:
Cleaning:
0.8Nm (7.08 lb•in)
Manual Soldering: See Profile A in Supplement section.
Hand clean locally with alcohol based solution
Standards & Certifications
Flammability Standards:
UL:


UL94V-0 housing & base
File No. E44145
All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC.
Add “/U” to end of part number to order UL mark on switch.
Add “/CUL” to end of part number to order cULus mark on switch.
D66
w w w.nkk.com