NJL6401R-3 Datasheet, PDF (7/7 Pages) New Japan Radio – COBP High Speed Photo Diode

NJL6401R-3
PACKING SPECIFICATION
PACKING DIMENTIONS
Insert direction
UNIT : mm
Drawing direction
P2
P0
D0
(TE1)
P1
A
D1
T0
T1
SIMBOL
A
B
D0
D1
E
F
P0
P1
P2
T0
T1
W0
W1
DIMENSION
1.40 ±0.10
2.00 ±0.10
1.50
+0.10
-0.0
1.10 ±0.10
1.75 ±0.10
3.50 ±0.05
4.00 ±0.10
4.00 ±0.10
2.00 ±0.05
0.25 ±0.05
1.05 ±0.10
8.00 ±0.30
5.40 ±0.10
REMARKS
BOTOM DIMENSION
BOTOM DIMENSION
THICKNESS 0.1MAX
* Carrier tape material : Polycarbonate(antistatic)
Cover tape material : Polyester(antistatic)
Taping Strength
Pull up the cover tape from the carrier tape, and when the opening angle comes around 10 to 15 , and the peeling-off strength
Is to be within the power of 20 to 40g.
Packaging
1) The taped products are to be rolled up on the taping reel as on the drawing.
2) Rolling up specification
2-1) Start rolling
: Carrier tape open space more than 20 Pieces.
2-2) End of rolling
: Carrier tape open space more than 20 Pieces, and 2 round of reel space at the cover tape only.
3) Taping quantity
: 2,000 Pieces
4) Seal off after putting each reels in a damp proof bag with silica gel.
20.June.2014 Rev.2.2
W0
W1
E
D
SIMBOL
DIMENSION
A
φ180.0±1.0
B
φ60.0±1.0
C
φ13.0±0.2
D
φ21.0±0.8
C
E
2.0±0.5
W0
9.5±1.0
W1
13.1±1.0
* Reel material : PPE(antistatic)
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
-7-