NJU6676 Datasheet, PDF (1/46 Pages) New Japan Radio – 64-Common X 132-Segment plus 1-Icon Bit Map Type LCD Controller and Driver

NJU6676
PRELIMINARY
64-Common X 132-Segment plus 1-Icon
Bit Map Type LCD Controller and Driver
s GENERAL DESCRIPTION
The NJU6676 is a bit map LCD driver to display
graphics or characters. It contains 8,580 bits display data
RAM, microprocessor interface circuits, instruction
decoder, 132-segment drivers, 64-common drivers and 1-
icon drivers.
The bit image display data is transferred to the display
data RAM by serial or 8-bit parallel interface.
65 x 132 dots graphics or 8-character 4-line by 16 x 16
dots character with icon are displayed by NJU6676 itself.
The wide operating voltage from 2.2 to 5.5V and low
operating current are useful for small size battery
operating items.
The build-in Electrical Variable Resistance is very
precision, furtheremore the rectangle outlook is very
applicable to COG or Slim TCP.
s PACKAGE
NJU6676CH
s FEATURES
q Direct Correspondence between Display Data RAM and LCD Pixel
q Display Data RAM - 8,580 bits
q 197 LCD Drivers - 65-common and 132-segment
q Direct Microprocessor Interface for both of 68 and 80 type MPU
q Serial Interface
q Programmable Bias selection ; 1/7,1/9 bias
q Useful Instruction Set
Display Data Read/Write, Display ON/OFF Cont, Static indicator, Display Start Line Set, Bias Select,
Inverse Display, Common Driver order Assignment, Power control set, Page Address Set,
Column Address Set,Status Read, All On/Off, ADC Select, Read Modify Write, Power Saving.
q Power Supply Circuits for LCD Incorporated
Voltage Booster Circuits (4-time Maximum), Regulator, Voltage Follower x 4
q Precision Electrical Variable Resistance (64-step)
q Low Power Consumption 80uA(Typ.).
q Operating Voltage (All the voltages are based on VDD=0V.)
- Rogic Operating Voltage
: -2.2V ∼ -5.5V
- Voltage Booster Operating Voltage : -2.5V ∼
- LCD Driving Voltage
q Rectangle outlook for COG
: -6.0V ∼ -18.0V
q Package Outline : Bump-chip / TCP
q C-MOS Technology
Ver.1.31