NS4L107T Datasheet, PDF (3/18 Pages) NICHIA CORPORATION – WARM WHITE LED

Nichia STS-DA1-0204
<Cat.No.080513>
Rank e1
x 0.3897 0.3988 0.4162 0.4390 0.4255 0.4053
y 0.3823 0.4116 0.4200 0.4310 0.4000 0.3907
Rank e2
x 0.3822 0.3897 0.4053 0.4255 0.4129 0.3954
y 0.3580 0.3823 0.3907 0.4000 0.3725 0.3642
Rank f3
x 0.4255 0.4390 0.4680 0.4519
y 0.4000 0.4310 0.4385 0.4086
Rank f4
x 0.4519 0.4680 0.4970 0.4770
y 0.4086 0.4385 0.4466 0.4137
Rank f5
Rank f6
x 0.4129 0.4255 0.4519 0.4355
x 0.4355 0.4519 0.4770
y 0.3725 0.4000 0.4086 0.3785
y 0.3785 0.4086 0.4137
Color Coordinates Measurement allowance is ± 0.01.
Basically, a shipment shall consist of the LEDs of a combination of the above ranks.
The percentage of each rank in the shipment shall be determined by Nichia.
0.4588
0.3838
Correspondence table of Color Coordinates – Luminous Flux ranks
Ranking by Luminous Flux
P10 P11 P12 P13
Ranking by Color Coordinates
d1, d2
e1, e2,
f3, f4, f5, f6
Shaded ranks are available.
2.INITIAL OPTICAL/ELECTRICAL CHARACTERISTICS
Please refer to “CHARACTERISTICS” on the following pages.
3.OUTLINE DIMENSIONS AND MATERIALS
Please refer to “OUTLINE DIMENSIONS” on the following page.
Material as follows ; Package
: Ceramics
Encapsulating Resin : Silicone Resin (with Diffused + Phosphor)
Electrodes
: Au Plating
Die Heat sink
: Ag Plating Copper
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to “TAPING DIMENSIONS” and “PACKING ”on the following pages.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
-2-