PXIE-5663 Datasheet, PDF (5/8 Pages) National Instruments Corporation – Vector Signal Analyzer

Vector Signal Analyzer
Specifications
Frequency
Frequency range¹................................... 10 MHz to 6.6 GHz
Tuning resolution................................... 533 nHz
1 _{An NI 5663 is operational to 1 MHz. The maximum tuned frequency = 6.6 GHz – ½ (frequency span).}
Bandwidth
Equalized Bandwidth
Tuned Frequency
Equalized Bandwidth (MHz)
10 MHz to <120 MHz
10
120 MHz to <330 MHz
20
330 MHz to 6.6 GHz
50
Note: Using automatic calibration correction through the NI-RFSA instrument driver.
Resolution Bandwidth
3 dB bandwidth...................................... Fully adjustable (<1 Hz to 10 MHz)
Selectivity
Window
60 dB: 3 dB Ratio
Flat Top
2.5, maximum
7-term Blackman-Harris
4.1, maximum
Note: The NI-RFSA instrument driver also supports additional window types.
Spectral Purity
Phase Noise
Single Sideband (SSB) Phase Noise
Tuned Frequency
100 MHz
Noise Density
<-125 dBc/Hz
500 MHz
<-112 dBc/Hz
1 GHz
2 GHz
<-105 dBc/Hz
<-98 dBc/Hz
3 GHz
<-95 dBc/Hz
4 GHz
5 GHz
<-93 dBc/Hz
<-90 dBc/Hz
6.6 GHz
<-90 dBc/Hz
Note: 10 kHz offset; measured using an NI 5652 with an internal reference clock.
–80.0 –
–85.0 –
–90.0 –
–95.0 –
–100.0 –
–105.0 –
–110.0 –
–115.0 –
–120.0 –
–125.0 –
–130.0 –
–135.0 –
–140.0 –
100.000
1.000k
10.000k
100.000k
Frequency Offset (Hz)
1.000M
Figure 1. Typical Phase Noise at 1 GHz
10.000M
–80.0 –
–85.0 –
–90.0 –
–95.0 –
–100.0 –
–105.0 –
–110.0 –
–115.0 –
–120.0 –
–125.0 –
–130.0 –
–135.0 –
–140.0 –
100.000
1.000k
10.000k
100.000k
Frequency Offset (Hz)
1.000M
Figure 2. Typical Phase Noise at 2.4 GHz
10.000M
–70.0–
–75.0–
–80.0–
–85.0–
–90.0–
–95.0–
–100.0–
–105.0–
–110.0–
–115.0–
–120.0–
–125.0–
–130.0–
–135.0–
–140.0–
100.000
1.000k
10.000k
100.000k
Frequency Offset (Hz)
1.000M
Figure 3. Typical Phase Noise at 5.8 GHz
10.000M
Absolute Accuracy
Frequency
23 °C ± 5 °C
Accuracy
0 °C to 55 °C¹
10 MHz to <120 MHz
±2.2 dB (±1.4 dB, typical)
±2.3 dB (±1.5 dB, typical)
120 MHz to <400 MHz
±1.7 dB (±0.65 dB, typical)
±1.8 dB (±0.75 dB, typical)
400 MHz to <3.0 GHz
±1.6 dB (±0.65 dB, typical)
±1.8 dB (±0.75 dB, typical)
3.0 GHz to <5.5 GHz
±1.7 dB (±0.65 dB, typical)
±1.8 dB (±0.75 dB, typical)
5.5 GHz to 6.6 GHz
±1.6 dB (±0.65 dB, typical)
±2.0 dB (±1.0 dB, typical)
Note: RF attenuation ≥8 dB; signal-to-noise ratio ≥20 dB.
1_{Using automatic calibration correction of the NI-RFSA instrument driver, within ±5 °C}
of a self-calibration by the niRFSA Self Cal VI or the niRFSA_SelfCal function.
Linearity
Third-Order Intermodulation Distortion (Input IP₃ (IIP₃))
(Typical)
-20 dBm Reference Level
Frequency Range
10 MHz to <30 MHz
30 MHz to <330 MHz
330 MHz to <3.0 GHz
3.0 GHz to 6.6 GHz
Note: Two - 24 dBm input tones = 200 kHz apart.
Input IP₃
≥5 dBm
≥7 dBm
≥12 dBm
≥9 dBm
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
5