N-HFA08TB60 Datasheet, PDF (1/6 Pages) Nell Semiconductor Co., Ltd – FRED Ultrafast Soft Recovery Diode, 8 A

SEMICONDUCTOR
N-HFA08TB60 ^RRooHHSS
Nell High Power Products
FRED
Ultrafast Soft Recovery Diode, 8 A
FEATURES
Ultrafast recovery
Ultrasoft recovery
Very low IRRM
Very low Q _rr
Specified at operating conditions
Lead (Pb)-free
Designed and qualified for industrial level
BENEFITS
Reduced RFI and EMI
Reduced power loss in diode and switching transistor
Higher frequency operation
Reduced snubbing
Reduced parts count
cathode
2
Available
RoHS*
COMPLIANT
DESCRIPTION
HFA08TB60 is a state of the art ultrafast recovery
diode. Employing the latest in epitaxial construction
and advanced processing techniques it features
a superb combination of characteristics which result
in performance which is unsurpassed by any rectifier
previously available. With basic ratings of 600V
and 8 A continuous current, the HFA08TB60 is
especially well suited for use as the companion
diode for IGBTs and MOSFETs. In addition to ultrafast
recovery time, the FRED product line features
extremely low values of peak recovery current (IRRM)
and does not exhibit any tendency to “snap-off” during
the tb portion of recovery. The FRED features combine
to offer designers a rectifier with lower noise and
significantly lower switching losses in both the diode
and the switching transistor. These FRED advantages
can help to significantly reduce snubbing, component
count and heatsink sizes. The FRED HFA08TB60
is ideally suited for applications in power supplies and
conversion systems (such as inverters), motor drives,
and many other similar applications where high speed,
high efficiency is needed.
1
3
Cathode Anode
TO-220AC
PRODUCT SUMMARY
V_R
V_F at 8A at 25 ºC
I_F(AV)
t_rr (typical)
T_J (maximum)
Q_rr (typical)
dI_(rec)M/dt (typical)
I_RRM
600 V
1.7 V
8A
18 ns
150 ºC
65 nC
240 A/µS
5.0A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Cathode to anode voltage
Maximum continuous forward current
Single pulse forward current
Maximum repetitive forward current
Maximum power dissipation
Operating junction and storage temperature range
SYMBOL
V_R
I_F
I_FSM
I_FRM
P_D
T_J, T_Stg
TEST CONDITIONS
Tc = 100 ºC
Tc = 25 ºC
Tc = 100 ºC
VALUES
600
8
60
24
36
14
- 55 to + 150
UNITS
V
A
W
ºC
www.nellsemi.com
Page 1 of 6