UPG2121TB Datasheet, PDF (1/8 Pages) NEC – L-BAND UP/DOWN CONVERTER

PRELIMINARY DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG2121TB
L-BAND UP/DOWN CONVERTER
DESCRIPTION
The µPG2121TB is L-band up-converter or down-converter IC (LO Buff. Amp. + Passive Mixer). The device can
convert the RF frequency to IF frequency and operate low current. It housed in an original 6-pin super minimold
package that is smaller than usual 6-pin minimold easy to install and contributes to miniaturizing the system.
FEATURES
• +2.8 V single voltage
• Low distortion (IIP3 = +23 dBm TYP.)
• Low current operation (IDD = 3.5 mA TYP.)
• LO buffer amplifier and passive mixer on a single chip
• 6-pin super minimold package (Size: 2.0 × 1.25 × 0.9 mm)
APPLICATION
• L-band digital cellular etc.
ORDERING INFORMATION
Part Number
µPG2121TB-E3
Package
6-pin super minimold
Marking
G2E
Supplying Form
Embossed tape 8 mm wide.
Pin 1 face the tape perforation side.
Qty 3kpcs / reel.
Remark To order evaluation samples, please contact your local NEC sales office.
(Part number for sample order: µPG2121TB)
Caution The IC must be handled with care to prevent static discharge because its circuit composed of
GaAS HJ-FET.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P15014EJ1V0DS00 (1st edition)
Date Published July 2000 NS CP(K)
Printed in Japan
©
2000