UPD75P336 Datasheet, PDF (1/56 Pages) NEC – 4-BIT SINGLE-CHIP MICROCOMPUTER

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75P336
4-BIT SINGLE-CHIP MICROCOMPUTER
DESCRIPTION
The µPD75P336 is a version of the µPD75336 in which the on-chip mask ROM is replaced by one-time
PROM.
As the µPD75P336 is user-programmable, it is suitable for preproduction in system development, and for
short-run and multiple device-production.
Detailed function description, etc. are described in the following User's manual. Be sure to read it when
designing. µPD75336 User's Manual: IEU-725
FEATURES
• µPD75336 compatible
• Memory capacity:
• PROM : 16256 × 8 bits
• RAM : 768 × 4 bits
• Operable over same supply voltage range as mask ROM µPD75336
• VDD = 2.7 to 6.0 V
• On-chip 8-bits resolution A/D converter (successive approximation type)
• On-chip LCD controller/driver
ORDERING INFORMATION
Ordering Code
Package
Quality Grade
µPD75P336GC-3B9
80-pin plastic QFP ( 14mm)
Standard
µPD75P336GK-BE9
80-pin plastic TQFP (fine pitch)( 12mm)
Standard
5
Note Pull-up resistor cannot be incorporated by mask option.
Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by
NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
Document No. IC-2980A
(O. D. No. IC-8371A)
Date Published October 1993P
Printed in Japan
The information in this document is subject to change without notice.
The mark 5 shows major revised points.
© NEC Corporation 1993