UPD720122 Datasheet, PDF (1/82 Pages) NEC – MOS Integrated Circuit

DATA SHEET
MOS Integrated Circuit
µPD720122
USB2.0 Generic Device Controller
The µPD720122 is USB2.0 Generic Device Controller, which combines the NEC Electronics USB2.0 PHY and End-
point Controller. The Controller has certified by USB Implementers Forum. End-point Controller has banked two Bulk End-
point and one Interrupt End-point, and selectable three general CPU bus-types, suitable for designing various USB
device. The controller has the external local bus, that enables to perform high speed data transferring when CPU is
accessing to the controller. These IP Blocks in the controller are based completely on an NEC Electronics ASIC core, so
µPD720122 is suitable to design for the prototype system that are intended to design ASIC in the future.
Detailed function descriptions are provided in the following user’s manual. Be sure to read the manual before designing.
µPD720122 User’s Manual: S15829E
FEATURES
• Complaint with USB2.0 specification (Maximum data transferring rate: 480 Mbps)
• USB2.0 certified (TestID=40000822)
• High(480Mbps) / Full(12Mbps)- Speed support and switch automatically
• Easy to design NEC Electronics ASIC
• Generic USB2.0 Device Controller
• Two Bulk End-points and One Interrupt End-point
• Performed Data Local Bus independent from CPU bus.
(Maximum Data Transferring rate: 21 MBps with DMA mode )
• Selectable three CPU Bus Interface
ORDERING INFORMATION
Part Number
µPD720122GC-9EU
µPD720122F1-DN2
Package
100-pin plastic TQFP (Fine pitch) (14 × 14)
109-pin plastic FBGA (11 × 11)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S16685EJ2V0DS00 (2nd edition)
Date Published June 2003 NS CP (K)
Printed in Japan
The mark shows major revised points.
2003