UPD17062 Datasheet, PDF (1/296 Pages) NEC – 4-BIT SINGLE-CHIP MICROCONTROLLER CONTAINING PLL FREQUENCY SYNTHESIZER AND IMAGE DISPLAY CONTROLLER

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD17062
4-BIT SINGLE-CHIP MICROCONTROLLER CONTAINING PLL FREQUENCY
SYNTHESIZER AND IMAGE DISPLAY CONTROLLER
The µPD17062 is a 4-bit CMOS microcontroller for digital tuning systems. The single-chip device
incorporates an image display controller enabling a range of different displays, together with a PLL frequency
synthesizer.
The CPU has six main functions: 4-bit parallel addition, logic operation, multiple bit test, carry-flag set/
reset, powerful interrupt, and a timer.
The device contains a user-programmable image display controller (IDC) for on-screen displays. The
different displays can be controlled with simple programs.
The device also has a serial interface function, many input/output (I/O) ports controlled by powerful I/O
instructions, and 6-bit pulse width modulation (PWM) output for a 4-bit A/D converter and D/A converter.
FEATURES
• 4-bit microcontroller for digital tuning system
• Internal PLL frequency synthesizer: With prescaler
µPB595
• 5 V ±10%
• Low-power CMOS
• Program memory (ROM): 8K bytes (16 bits × 3968
steps)
• Data memory (RAM): 4 bits × 336 words
• 6 stack levels
• 35 easy-to-understand instruction sets
• Support of decimal operations
• Instruction execution time: 2 µs (with an 8-MHz
crystal)
• Internal D/A converter: 6 bits × 4 (PWM output)
• Internal A/D converter: 4 bits × 6
• Internal horizontal synchronizing signal counter
• Internal commercial power frequency counter
• Internal power-failure detector and power-on reset
circuit
• Internal image display controller (IDC) (user-pro-
grammable)
Number of characters in display: Up to 99 on a
single screen
Display configuration: 14 rows × 19 columns
Number of character types: 120
Character format: 10 × 15 dots (rimming possible)
Number of colors: 8
Character size: Four sizes in each of the horizontal
and vertical dimensions
Internal 1H circuit for preventing vertical deflection
• Internal 8-bit serial interface (One system with two
channels: three-wire or two-wire)
• Interrupt input for remote-controller signals (with
noise canceler)
• Many I/O ports
Number of I/O ports : 15
Number of input ports : 4
Number of output ports: 8
The information in this document is subject to change without notice.
Document No. IC-3560
(O.D. No. IC-8937)
Date Published January 1995 P
©
Printed in Japan
1995