DE2E3KY102MN2AM01 Datasheet, PDF (66/83 Pages) Murata Manufacturing Co., Ltd. – Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C85E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Jul.13,2011
High Voltage Ceramic Capacitors !Caution
Continued from the preceding page.
<Fig. 3 (continued)> Allowable Voltage (Sine Wave Voltage) -
Frequency Characteristics
(At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied
voltage is a rectangular wave or pulse wave voltage
(instead of a sine wave voltage), the heat generated by
the capacitor is higher than the value obtained by
application of the sine wave with the same fundamental
frequency.
Roughly calculated for reference, the allowable voltage
for a rectangular wave or pulse wave corresponds
approximately to the allowable voltage for a sine wave
whose fundamental frequency is twice as large as that of
the rectangular wave or pulse wave.
This allowable voltage, however, varies depending on the
voltage and current waveforms.
Therefore, you are requested to make sure that the self-
heating temperature is not higher than the value specified
in Table 1.
DEA Series SL Char. (Rated Voltage: DC3.15kV)
10000
(3150)
1000
10pF
100pF
220pF
DEC Series SL Char. (Rated Voltage: DC6.3kV)
10000
(6300)
to 22pF
47pF
100pF
1000
100
1
10
100
Frequency (kHz)
1000
DES Series D Char. (Rated Voltage: DC500V)
10000
11
1000
(500)
100
1
to 1000pF
2200pF
4700pF
10
100
Frequency (kHz)
1000
100
1
10
100
Frequency (kHz)
1000
DES Series D Char. (Rated Voltage: DC1kV)
10000
1000
100
1
100pF
220pF
470pF
1000pF
2200pF
4700pF
10
100
Frequency (kHz)
1000
Continued on the following page.
64