DE2E3KH102MN3A Datasheet, PDF (29/72 Pages) Murata Manufacturing Co., Ltd. – Safety Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors

C85E.pdf !Note • Th!is PNDoFteca•taPlolegasisedroewadnlroaatdinegdafnrodm!thCeAwUeTbIOsiNte(ofof rMsutoraratageM, aonpuefraactitnugri,nrgatcinog.,,ltsdo.ldTehreinregf,omreo,uint’tsinsgpaencdifichaatniodnlisnga)reinstuhbisjeccatttaolocghatongpereovreonut rsmprookdiuncgtsanind/iot rmbauyrnbiengd,isectco.ntinued without advance notice. Please check with our
sales repres_•en_Tt_ha_istiv_ce_as_tao_lor _gpr_ho_ad_suc_ot_ne_lyn_tg_yi_pn_ie_ce_ar_ls_spb_ee_cfo_ifr_ice_ao_tir_od_ne_sri_bn_eg_c. _{ause there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.}
08.10.29 ^{• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.}
Safety Certified Ceramic Capacitors !Caution
s !Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
s !Caution (Soldering and Mounting)
5
1. Vibration and Impact
the bonded, molded or coated product in the
Do not expose a capacitor or its leads to
intended equipment.
excessive shock or vibration during use.
In case the amount of applications,
2. Soldering
dryness/hardening conditions of adhesives and
When soldering this product to a PCB/PWB, do not
molding resins containing organic solvents
exceed the solder heat resistance specifications of
(ethyl acetate, methyl ethyl ketone, toluene, etc.)
the capacitor. Subjecting this product to excessive
are unsuitable, the outer coating resin of a
heating could melt the internal junction solder and
capacitor is damaged by the organic solvents and
may result in thermal shocks that can crack the
it may result, worst case, in a short circuit.
ceramic element.
The variation in thickness of adhesive, molding
When soldering capacitor with a soldering iron, it
resin or coating may cause outer coating resin
should be performed in the following conditions.
cracking and/or ceramic element cracking of a
Temperature of iron-tip: 400 degrees C. max.
capacitor in a temperature cycling.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
3. Bonding, Resin Molding and Coating
RESULT, WORST CASE, IN A SHORT CIRCUIT
Before bonding, molding or coating this product,
AND CAUSE FUMING OR PARTIAL DISPERSION
verify that these processes do not affect the
WHEN THE PRODUCT IS USED.
quality of capacitor by testing the performance of
s !Caution (Handling)
Vibration and Impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
27