RUW15 Datasheet, PDF (2/5 Pages) Murata Manufacturing Co., Ltd. – Isolated Ultra-Wide Input DC/DC Converters

RUW15 Series
Isolated Ultra-Wide Input DC/DC Converters
EFFICIENCY
Order Code
RUW15SL12C
RUW15SL12HC
RUW15SL24C
RUW15SL24HC
24
Min.
Typ.
75.6
77.1
75.6
77.1
76.7
77.7
70.4
75
48
Min.
Typ.
76.2
78.2
72.4
75.9
77.5
78.6
72.6
77.3
Input Voltage
72
Min.
Typ.
74.1
77.3
70.8
75.4
76.5
77.8
72.2
76.9
110
Min.
Typ.
72.6
76.3
69.6
74.5
74.3
76
70.9
75.2
Units
160
V
Min.
Typ.
65.7
71.7
63.1
69.6
%
66.3
70.1
63.8
69.2
GENERAL CHARACTERISTICS
Parameter
Switching frequency
Remote on/off pin functionality
Conditions
Module on
Module off
Min.
Typ.
Max.
Units
100
kHz
OPEN
0
0.5
V
ABSOLUTE MAXIMUM RATINGS
Input voltage, SL input types
Remote On/Off
170V
20V ±5V
APPLICATION NOTES
Output Capacitors
The RUW series does not require output capacitors to meet datasheet specification. To meet datasheet specifications, total output capacitance should not exceed:
Output Voltage (V)
12
15
Max. Recommended Output Capacitance (μF)
470
220
ISOLATION CHARACTERISTICS
Parameter
Isolation test voltage
Resistance
Capacitance
Conditions
Flash tested for 1 second
VISO = 500VDC
12VOUT types
24VOUT types
Min.
Typ.
Max.
Units
4000
VAC
2
GΩ
60
pF
76
ENVIRONMENTAL CHARACTERISTICS
Parameter
Conditions
Ambient temperature
See derating graph
Storage
Thermal protection
Operates at case temperature
Case temperature rise above ambient 100% load, still air, see derating graph
Min.
Typ.
Max.
Units
-40
85
°C
-50
125
°C
120
°C
40
°C
SAFETY
UL 60950 for reinforced insulation pending.
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260ºC for 10 seconds. The pin termination finish
on this product series is a Gold flash (0.05-0.10 micron) over Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems.
Tinned tabs are provided along the case edges to provide mechanical support through slots in the PCB. Hand soldering of these tabs may be
necessary to ensure satisfactory joint quality.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_RUW15.A01 Page 2 of 5