LSN-T10-D12J Datasheet, PDF (2/12 Pages) Murata Manufacturing Co., Ltd. – Single Adjustable Output, Non-isolated, 12Vin, 10A, SIP, DC/DC Converters

LSN-T/10-D12
Single Adjustable Output, Non-isolated, 12Vin, 10A, SIP, DC/DC Converters
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Output
Model
VOUT
(Volts)
IOUT
(Amps)
R/N (mVp-p)
Typ.
Max.
LSN-T/10-D12
0.7525-5.5 10
35
55
Regulation (Max.)
Line
Load
±0.06% ±0.2%
VIN Nom.
(Volts)
12
Input
Range
(Volts)
10-14
IIN
(mA/A)
80/4.32
Efficiency
Full Load
VIN=10V
Min.
Typ.
Typ.
95.5% 96.5% 97%
Package
(Case/
Pinout)
B5/B5x, P59
Typical at TA = +25°C under nominal line voltage, VOUT = 5V, and full-load conditions, unless
otherwise noted. All models are tested and specified with external 22μF tantalum input and output
capacitors. These capacitors are necessary to accommodate our test equipment and may not
be required to achieve specified performance in your applications. See I/O Filtering and Noise
Reduction.
Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with external
filtering. See I/O Filtering and Noise Reduction for details.
These devices have no minimum-load requirements and will regulate under no-load conditions.
Regulation specifications describe the output-voltage deviation as the line voltage or load is
varied from its nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
This is not a complete model number. Please see the Part Number Structure when ordering.
PART NUMBER STRUCTURE
MECHANICAL SPECIFICATIONS - VERTICAL MOUNTING
L SN - T / 10- D12 N H J - C
Output
Configuration:
L = Unipolar
RoHS-6 Compliant
J Suffix:
Reversed Pin
Vertical Mount
Nominal Output Voltage:
T = 0.75 - 5.25
Maximum Rated Output
Current in Amps
H Suffix:
Horizontal Mount
N Suffix:
On/Off Polarity:
Blank = Positive logic
N = Negative logic
Note:
Input Voltage Range:
Not all model number combinations _{D12 = 10-14 Volts}
are available. Contact Murata Power
(12V nominal)
Solutions.
MECHANICAL SPECIFICATIONS - HORIZONTAL MOUNTING
Case B5A - Horizontal Mounting
2.00
(50.80)
0.35
(8.89)
0.21
(5.33)
0.05
(1.27)
1 2 345
ISOLATING
0.55
PAD
6 7 8 9 10 11 (13.97)
0.030 ±0.001 DIA.
(0.762 ±0.025)
0.400
(10.16)
4 EQ. SP. @
0.100 (2.54)
1.000
(25.40)
0.500
(12.70)
5 EQ. SP. @
0.100 (2.54)
0.56
(14.22)
0.53
(13.46)
0.05
(1.27)
0.360
(9.14)
0.16
(4.06
Case B5 - Vertical Mounting
(Standard)
2.00
(50.80)
0.34
(8.64)
0.20
(5.08)
0.17
(4.32)
1 2 345
0.55
6 7 8 9 10 11 (13.97)
0.030 ±0.001 DIA.
(0.762 ±0.025)
0.400
(10.16)
4 EQ. SP. @
0.100 (2.54)
1.000
(25.40)
0.500
(12.70)
5 EQ. SP. @
0.100 (2.54)
0.05
(1.27)
0.110
(2.79)
0.046
(1.17)
0.25
(6.35)
LAYOUT PATTERN
TOP VIEW
0.34
(8.64)
Case B5B - Reverse Pin Vertical Mounting
(Tyco-compatible package)
0.36
(9.14)
2.00
(50.80)
0.20
(5.08)
0.17
(4.32)
1 2 345
0.55
(13.97)
6 7 8 9 10 11
0.030 ±0.001 DIA.
(0.762 ±0.025)
0.400
(10.16)
4 EQ. SP. @
0.100 (2.54)
1.000
(25.40)
0.500
(12.70)
5 EQ. SP. @
0.100 (2.54)
0.05
(1.27)
0.046
(1.17)
0.106
(2.69)
0.306
(7.8)
LAYOUT PATTERN
TOP VIEW
0.36
(9.14)
All dimension in Inches (mm)
0.50
(12.7)
0.55
(13.97)
RECOMMENDED
COPPER PAD
ON PCB (0.55 SQ. IN.)
LAYOUT PATTERN
TOP VIEW
All dimension in Inches (mm)
I/O Connections
Pin Function P59 Pin Function P59 Pin Function P59
1
+Output
5
Common
9
No Pin
2
+Output
6
Common
10
VOUT Trim
3
+Sense
7
+Input
11 On/Off Control
4
+Output
8
+Input
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
LSN-T10-D12.B01 Page 2 of 12