HPH_SERIES Datasheet, PDF (2/12 Pages) Murata Manufacturing Co., Ltd. – Isolated, Low VOUT to 70A, Half-Brick DC/DC Converters

HPH Series
Isolated, Low VOUT to 70A, Half-Brick DC/DC Converters
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Output
Root Model M
VOUT
(Volts)
IOUT Power
(Amps,
Max.) (Watts)
R/N (mV pk-pk)
Typ. Max.
HPH-1.5/80-D48N-C 1.5 80 120
Input
Regulation (Max.)
Line Load
VIN Nom. Range
(Volts) (Volts)
IIN, no
load
(mA)
IIN, full
load
(Amps)
Efficiency
Min. Typ.
Package
(Case/
Pinout)
HPH-1.8/80-D48N-C 1.8 80 144
Please contact Murata Power Solutions for further information. ^N
HPH-2.5/80-D48N-C 2.5 80 200
HPH-3.3/70-D48N-C 3.3 70 ^f 231 100 125 ±0.25% ±0.25% 48 36-75 70 5.35 88% 90% C61 P17
HPH-5/40-D48N-C 5
40 200 100 125 ±0.25% ±0.25% 48 36-75 70 4.58 90% 91% C61 P17
HPH-12/30-D48N-C 12 30 ^f 360 100 200 ±0.05% ±0.1% 48 36-75 150 8.06 92% 93% C61 P17
M _{Please refer to the full model number structure for additional ordering part numbers and options.}
N _{Contact Murata Power Solutions for availability.}
O _{All specifications are at nominal line voltage and full load, +25ºC. unless otherwise noted. See detailed specifications.}
f _{Full power continuous output requires baseplate installation. Please refer to the derating curves.}
PART NUMBER STRUCTURE
HPH - 3.3 / 70 - D48 N B H LX - C
Unipolar
High-Power Series
Nominal Output Voltage
Maximum Output Current
in Amps
RoHS Hazardous Materials compliance
C = RoHS-6 (no lead), standard
Y = RoHS-5 (with lead), optional, special quantity order
Pin length option
Blank = standard pin length 0.180 in. (4.6 mm)
L1 = 0.110 in. (2.79 mm)*
L2 = 0.145 in. (3.68 mm)*
*Special quantity order required
Input Voltage Range:
D48 = 36-75 Volts (48V nominal)
On/Off Control Polarity
N = Negative polarity, standard
P = Positive polarity, optional
Conformal coating (optional)
Blank = no coating, standard
H = Coating added, optional, special quantity order
Baseplate (optional)
Blank = No baseplate, standard
B = Baseplate installed, optional quantity order
Note: Some model combinations may not be
available. Contact Murata Power Solutions for
availability.
Note: Because of the high currents, wire the appropriate input, output and common pins in parallel. Be sure to use adequate PC board etch. If not sufficient, install additional discrete wiring.
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MDC_HPH_A12 Page 2 of 12