JECXDE-0015 Datasheet, PDF (11/16 Pages) Murata Manufacturing Co., Ltd. – Electrical Double Layer Capacitor

Specification of Electrical Double Layer Capacitor
9. Safety Test Specification
No
Item
Specification
Validation Method
1
Puncture
2
Compression
No smoke, ignition or rupture
No smoke, ignition or rupture
3
External Short Circuit No leakage, smoke, ignition or
rupture
4
Heating
No smoke, no ignition.
5
Static Electricity Test No leakage, smoke, ignition or
(ESD)
rupture
Preprocessing: Charge up to rated peak
voltage at 25degC.
Fully penetrate the center of capacitor by a
2.5φ needle.
Temperature: 60degC
Preprocessing:
1. Charge device to rated peak voltage at
25degC.
2. Press the center of the capacitor with 10φ
round bar and bend it at 90 degrees.(X and
Y directions, Both sides) at 60+/-2deg C.
Preprocessing:
Charge up device to rated peak voltage at
25degC
Connect plus and minus terminals by
external resistance of 80+/- 20mohm.
Temperature: 60degC.
Preprocessing: Charge up to peak rated
voltage at 25degC.
Allow capacitor to sit at 150degC for 3 hours
<HBM>C=150pF, R=150ohm, 1kV, 10 times
Test Object: balance terminal, plus terminal,
upper and under sides of package
Temperature: 25degC
10. Quality Assurance
(1) Murata’s responsibility for the quality of this product shall be limited to the specifications
and usage as stated in this document.
(2) The customer should evaluate and decide on the right type of assembly process and
operating conditions/environment for this product.
(3) Please keep device in sealed plastic package before use.
11. CAUTION
11.1 Limitation of Usage
This product is designed for standard consumer applications. For the following high reliability
applications, please contact Murata beforehand to discuss limitations and restrictions.
Wrongful use of this product could lead to malfunction and harm to human life or property.
(1)Aviation machinery (2) Space machinery (3) Undersea machinery
(4)Power plant control equipment (5)Transportation equipment (car, train, ship…etc.,)
(6)Signal machinery for traffic (7)Disaster prevention/crime prevention machinery
(8) Other equivalent machinery
Please do not use this product for any applications related to the followings.
(1)Military equipment (2) Medical Equipment
Murata Manufacturing Co., Ltd.
11