DSS6NB32A471Q55B Datasheet, PDF (10/40 Pages) Murata Manufacturing Co., Ltd. – EMI Suppression Filters (Lead Type EMIFIL)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMI Suppression Filters (Lead Type EMIFILr)
Ferrite Beads Inductors BL01/02/03 Series
c Features
BL01/02/03 series are ferrite beads with lead wires to
produce a high frequency loss for suppression of
noise. Simple construction and easy-to-use, effective
for low impedance circuits such as power supplies and
grounds. Effective also for preventing overshoot and
undershoot of digital signal in clocks or the like,
and suppressing the higher harmonic wave. Suitable for
prevention of abnormal oscillation at high frequency
amplifying circuit.
ø0.65
∗
∗
10±1.0
BL01RN1A2A2B
5.0±0.3
∗Coating extending on leads : 1.5 max.
(in mm)
8.0 max.
∗
ø3.4±0.2
∗
BL01RN1A1D2B
ø0.65
∗
20 min.
∗
5.0±0.3
20 min.
45 min.
∗Coating extending on leads : 1.5 max.
7.5 max.
(in mm)
ø3.4±0.2
∗
∗
BL02RN1R2M2B
5.0±0.8
ø0.65
∗There is excess bond stick on the wire. (in mm)
9.0 max.
ø3.4±0.2
BL02RN1R3J2B
5.0±0.8
ø0.65
∗There is excess bond stick on the wire.
(in mm)
9.0 max.
ø3.4±0.2
BL02RN2R1M2B
5.0±0.8
8.3 max.
ø0.65
(in mm)
ø2.3 max.
BL02RN2R3J2B
5.0±0.8
8
ø0.65
(in mm)
BL03RN2R1M1B
5.0±0.8
ø0.60
(in mm)