LQH2HP_G0 Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor Power Inductor

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH2HP_G0 Series (1008 Size)
c Dimensions
Polarity Marking
2.5±0.2
2.0±0.2
c Packaging
Code
Packaging
L
180mm Embossed Tape
Minimum Quantity
3000
0.85±0.3
0.85±0.3
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
Rated Current
(Based on Inductance Change) (Based on Temperature Rise)
LQH2HPN2R2MG0p
2.2µH ±20%
1640mA
LQH2HPN3R3MG0p
3.3µH ±20%
1290mA
LQH2HPN4R7MG0p
4.7µH ±20%
1000mA
LQH2HPN6R8MG0p
6.8µH ±20%
800mA
LQH2HPN100MG0p
10µH ±20%
700mA
LQH2HPN220MG0p
22µH ±20%
490mA
LQH2HPN101MG0p
100µH ±20%
210mA
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
1000mA
810mA
700mA
590mA
490mA
340mA
130mA
DC Resistance
0.17ohm ±20%
0.27ohm ±20%
0.36ohm ±20%
0.5ohm ±20%
0.73ohm ±20%
1.6ohm ±20%
10ohm ±20%
Self Resonance
Frequency (min.)
80MHz
65MHz
60MHz
10MHz
10MHz
10MHz
5MHz
c Notice (Rated Current)
Inductance will be more than the value which is
30% down from minimum rated Inductance value.
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.5.10
http://www.murata.com/