HPR1000C Datasheet, PDF (3/4 Pages) Murata Power Solutions Inc. – 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER

HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
TYPICAL PERFORMANCE CURVES
Specifications typical at T_A = +25°C, nominal input voltage, rated output current unless otherwise specified.
VOUT VS LOAD
(5Vout Models)
5.7
VOUT VS LOAD
(±5Vout Models)
5.4
5.5
5.2
5.3
5.0
5.1
4.9
0
40
80 120 160
Output Current (mA)
4.8
4.6
0
20
40
60
80
Output Current each load (mA)
12.5
12.4
12.3
12.2
12.1
12.0
11.9
0
VOUT VS LOAD
(12Vout Models)
20
40
60
80
Output Current each load (mA)
VOUT VS LOAD
(±12Vout Models)
12.6
12.5
12.4
12.3
12.2
12.1
12.0
0
10
20
30
40
Output Current each load (mA)
EFFICIENCY VS LOAD
90
75
60
45
30
15
0
0
20 40 60 80 100
% of Rated Load (%)
VOUT VS LOAD
(15Vout Models)
15.9
15.7
15.5
15.3
15.1
14.9
0
20
40
60
80
Output Current each load (mA)
OSCILLATION FREQUENCY VS
TEMPERATURE
220
200
180
160
140
-30
0
30
60
90
Temperature (°C)
VOUT VS LOAD
(±15Vout Models)
16.5
16.0
15.5
15.0
14.5
14.0
13.5
0
0.2 0.4 0.6 0.8 1.0
Output Power each load (Watts)
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this
time and temperature range, the integrity of the device’s plastic body will not be compromised and
internal temperatures within the converter will not exceed 175°C. Care should be taken to control
manual soldering limits identical to that of wave soldering.
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
TDC_HPR10XXC.C00 Page 3 of 4