D1U-H-2800-52-HBXC Datasheet, PDF (2/5 Pages) Murata Power Solutions Inc. – AC/DC Front End Power Supply

OUTPUT CHARACTERISTICS
Parameter
Remote Sense
Efficiency
Output Rise Monotonicity
Start-up Time
Transient Response
Current sharing accuracy (up to 3 in parallel)
Hot Swap Transients
Hold-up Time
GENERAL CHARACTERISTICS
Parameter
Storage Temperature Range
Operating Temperature Range
Operating Humidity
Storage Humidity
Shock
Sinusoidal Vibration
MTBF
Acoustic
Safety Approvals
Input Fuse
Material Flammability
Switching Frequency
Weight
PROTECTION CHARACTERISTICS
Output
Voltage
Parameter
Over-temperature
-52V
Over Voltage
Over Current
12Vsb ^{Over Voltage}
Over Current
ISOLATION CHARACTERISTICS
Parameter
Insulation Safety Rating / Test Voltage
Isolation
Material Flammability
Grounding
D1U-H-2800-52-HBxC Series
AC/DC Front End Power Supply
Conditions
Min.
Typ.
Max.
Units
Per rail
250
mV
220Vac
91.6
%
Overshoot less than 10% for all outputs, no voltage negative between 10% to 95% during ramp up
AC ramp up
1.5
s
PS_On activated
150
ms
-52V Ramp 1A/ms
12Vsb Ramp 1A/ms
±2080
mV
±600
At 100% load
±10
%
All outputs within regulation
15
19
ms
Conditions
Min.
Typ.
Max.
Non-condensing
-40
70
0
50
Non-condensing
10
90
5
90
30G non operating
0.5G, 5 – 500 Hz
Calculated per Bellcore at Ta=30°C
200
Demonstrated
200
ISO 7779-1999
60
C-CSA-US (CSA 60950-1-03/UL60950-1, first edition), CE Mark
Power Supply has internal 20A/250V fast blow fuse on the AC line input
UL 94V-0
95KHz for Boost PFC Converter
145KHz for Main Output Converter
200KHz for Standby Output Converter
2.3kg
Units
°C
%
Khrs
Khrs
dB LpAm
Conditions
Auto-restart
Latching
Auto-restart
Latching
Latching
Min.
Typ.
Max.
Units
55
65
°C
55
60
V
56
62
A
13
14
V
0.7
0.9
A
Conditions
Min.
Typ.
Max.
Units
Input to Output - Reinforced
3000
Vrms
Input to Chassis - Basic
1500
Vrms
Output to Chassis
Output to Output
UL 94V-0
Main Output Return and Standby Output Return are connected internally to chassis.
www.murata-ps.com/support
D1U-H-2800-52-HBxC.A08 Page 2 of 5