BWR33W Datasheet, PDF (2/12 Pages) Murata Power Solutions Inc. – Regulated 3.3V and 5V outputs

Dual Output BWR Models
Performance Specifications and Ordering Guide ^➀
Mixed Voltage, 5V AND 3.3V, 2” x 2”
33 Watt DC/DC Converters
ORDERING GUIDE SUMMARY
Output
Input
Models
BWR-5/6-3.3/7-D12
BWR-5/6-3.3/7-D24
BWR-5/6-3.3/7-D48
VOUT
(Volts)
5
3.3
5
3.3
5
3.3
IOUT ➁
(Amps)
6
7
6
7
6
7
R/N (mVp-p) ➂
Typ.
Max.
40
100
95
140
40
100
95
140
40
100
95
140
Regulation (Max.) ➆
VIN Nom.
Line Load ➃ No Load ➅ (Volts)
±1% ±1.5% ±2.5%
12
±0.5%
±1%
±1.5%
±1% ±1.5% ±2.5%
24
±0.5%
±1%
±1.5%
±1%
±0.5%
±1.5%
±1%
±2.5%
±1.5%
48
Range
(Volts)
10-18
18-36
36-75
IIN ➄
(mA)
70/3308
50/1615
25/780
Efficiency
Min. Typ.
83% 86%
85% 88%
85% 88%
➀ Typical at TA = +25°C under nominal line voltage and balanced “full-load” conditions (5V @ 3.3A/3.3V @ 5A).
➁ Any combination of 5V/3.3V rated IOUT current, not to exceed 33 Watts of output power. (See derating graphs.)
➂ Ripple/Noise (R/N) measured over a 20MHz bandwidth. All models are specified with 1µF ceramic output capacitors.
➃ Tested from 10% load to 100% load (other output at 10% load).
➄ Nominal line voltage, no load/balanced full-power condition.
➅ Tested from no-load to 100% load (other output at no-load).
➆ Output trim may impact 5V load regulation.
Package
(Case,
Pinout)
C4,P33
C4,P33
C4,P33
PART NUMBER STRUCTURE
BWR - 5 / 6 - 3.3 / 7 - D48 LX _- C
Dual Output/
Mixed-Voltage Series
RoHS-6 Compliance*
V1 Nominal Output Voltage:
5 Volts
Optional Functions
I1 Maximum Output Current:
6 Amps
Input Voltage Range:
D12 = 10-18 Volts (12V nominal)
D24 = 18-36 Volts (24V nominal)
V2 Nominal Output Voltage:
D48 = 36-75 Volts (48V nominal)
3.3 Volts
I2 Maximum Output Current:
7 Amps
Optional Functions
BWR 33 Watt DC/DC’s are designed with an On/Off Control
function with positive polarity in the pin 4 position.
L1 Pin length: 0.110 in. (2.79mm) ±0.010
L2 Pin length: 0.145 in. (3.68mm) ±0.010
Pin length options require a minimum order quantity.
Refer to the last page for additional options.
* Contact MPS for availability.
MECHANICAL SPECIFICATIONS
2.00
(50.80)
0.45
(11.43)
C0C4aMseetaCl C4ase
0.20 MIN
(5.08)
1.800
(45.72)
METAL CASE
INSULATED BASE
0.040 ±0.002 DIA
(1.016 ±0.051)
0.10
(2.54)
0.200
5
(5.08)
6
1
2
0.400
7
(10.16)
4
8
0.100
(2.54)
BOTTOM VIEW
Dimensions in inches (mm)
www.murata-ps.com/support
1.200
(30.48)
3 EQ. SP. @
0.400 (10.16)
2.00
(50.80)
0.40
(10.16)
I/O Connections
Pin Function P33
1
+Input
2
–Input
3
No Pin
4 On/Off Control
5
+5V Output
6 Output Return
7 +3.3V Output
8
Trim
Notes:
For “D12” and “D24” models the
case is connected to pin 2 (–Input).
For “D48” models, the case is
connected to pin 1 (+Input).
MDC_BWR 33W Models.A05 Page 2 of 12