BWR33W Datasheet, PDF (1/12 Pages) Murata Power Solutions Inc. – Regulated 3.3V and 5V outputs

www.murata-ps.com
Dual Output BWR Models
Mixed Voltage, 5V AND 3.3V, 2” x 2”
33 Watt DC/DC Converters
FEATURES
Regulated 3.3V and 5V outputs
5V @ 6Amps/3.3V @ 7 Amps capability
_{33 Watts total output power}
No-load operation
Available input voltage ranges:
10-18V, 18-36V or 36-75V
_{Small 2" x 2" x 0.45" package}
UL1950 and EN60950-1 safety approvals
 _{mark available (75V-input models)}
Continuous short-circuit protection
Fully isolated, 1500Vdc guaranteed
–40 to +100°C operating temperature
Input under and overvoltage shutdown
Output overvoltage protection
Thermal shutdowns
+INPUT
(1)
Typical units
PRODUCT OVERVIEW
For applications requiring 33 watts of power from
5V and 3.3V, DATEL offers a new power sharing
DC/DC converter capable of meeting your output
current requirements. The BWR-5/6-3.3/7-D48
(36-75V input), BWR-5/6-3.3/7-D24 (18-36V
input) and BWR-5/6-3.3/7-D12 (10-18V input)
are fully isolated DC/DC converters capable of
delivering any combination of 5V and 3.3V load-
ing up to a combined total of 33 Watts of output
power.
Housed in a standard 2" x 2" x 0.45" metal
package coated with electrically non-conductive
finish, these converters utilize a shared control-
loop system to assure load regulation of ±1% for
3.3V output and ±1.5% for 5V output. All models
include input Pi filtering, input overvoltage and
undervoltage shutdown circuitry, output overvolt-
age protection, output short-circuit and current
limiting protection, and thermal shutdown.
Each design also provides trim capability and
on/off control function. Fully synchronous output
rectification renders high efficiency and no-load
operation.
BWR power sharing modules offer low ripple
and noise performance, high efficiency (88%),
1500Vdc of isolation voltage, and are fully
specified for –40 to +100°C operation. These
devices meet IEC950, UL1950 and EN6950 safety
standards, including BASIC insulation require-
ments for “D48” models. CB reports are available
on request. “D48” models are CE marked (meet
LVD requirements).
SWITCH
CONTROL
+5V OUTPUT
(5)
+3.3V OUTPUT
(7)
–INPUT
(2)
ON/OFF
CONTROL
(4)
PWM
CONTROLLER
UV & OV
COMPARATORS
THERMAL
SHUTDOWN
Typical topology is shown.
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
OPTO
ISOLATION
ACTIVE
BLEEDER
REFERENCE &
ERROR AMP
Figure 1. Simplified Schematic
OUTPUT
RETURN
(6)
TRIM
(8)
MDC_BWR 33W Models.A05 Page 1 of 12