MSK5102-50_15 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – Extremely Compact 10 Pin Flatpack With Metal Base

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
HIGH CURRENT,
LOW DROPOUT
VOLTAGE REGULATORS
5102
SERIES
FEATURES:
Extremely Compact 10 Pin Flatpack With Metal Base
Extremely Low Dropout Voltage: 350mV @ 1.5 Amps
Available in +1.5V, +1.7V, +1.8V, +1.9V, +2.5V, +3.3V, +5.0V and +12.0V
TTL Level Enable Pin: Zero Current Shutdown Mode
Reverse Battery and Load Dump Protection
Low Ground Current: 32mA Typical at Full Load
1% Guaranteed Accuracy
Output Current to 1.5 Amps
DESCRIPTION:
The MSK5102 series voltage regulators are available in +1.5V, +1.7V, +1.8V, +1.9V, +2.5V, +3.3V, +5.0V and +12.0V
configurations. All boast ultra low dropout specifications due to the utilization of a super PNP output pass transistor with
monolithic technology. Dropout voltages of 350mV at 1.5 amps are typical in this configuration, which drives efficiency up
and power dissipation down. Accuracy is guaranteed with a 1% output voltage tolerance. The series also offers a TTL/CMOS
compatible on/off enable function. The MSK5102 series is packaged in a space efficient 10 pin ceramic flatpack with a built
in metal base.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Constant Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
PIN-OUT INFORMATION
1 NC
2 ENABLE
3 VIN A
4 VIN B
5 NC
6 VOUT A
7 VOUT B
8 VOUT C
9 NC
10 NC
BASE
The base of the package is electrically
connected to ground.
1
8548-36 Rev. D 5/15