MSK4204RH_15 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – Total Dose Hardened To TBD Krad(Si) (Method 1019.8 Condition A)

MIL-PRF-38534 CERTIFIED
4204RH 100 VOLT 10 AMP RAD-HARD
H-BRIDGE PWM MOTOR
M.S.KENNEDY CORP.
DRIVER/AMPLIFIER
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
Total Dose Hardened To TBD Krad(Si) (Method 1019.8 Condition A)
100 Volt, 10 Amp Capability
Self-Contained Smart Lowside/Highside Drive Circuitry
Internal PWM Generation, Shoot-through Protection
Isolated Case Allows Direct Heatsinking
Available Fully Screened To MIL-PRF-38534 Class K and Class H
Output Stage Includes Blocking and Reverse Diodes
Contact MSK for MIL-PRF-38534 Qualification and Appendix G (Radiation Status)
[phone]
DESCRIPTION:
The MSK 4204RH is a radiation hardened complete H-Bridge microcircuit intended for use in DC brushed motor control
applications or Class D switchmode amplification in space or other severe operating environments. The internal compo-
nents have been selected to provide total dose up to 300K RAD for military and space applications. All of the drive/control
circuitry for the lowside and highside switches are internal to the device. The PWM circuitry is internal as well, leaving the
user to only provide an analog signal for the motor speed/direction, or audio signal for switchmode audio amplification. If
100% duty cycle is required, access to the high-side bias has been provided. With the addition of two isolated power
supplies 100% duty cycle is possible. The MSK 4204RH is packaged in a space efficient isolated power package, available
in three lead form configurations that can be directly connected to a heatsink.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
PIN-OUT INFORMATION
1 GND
2 GND
3 GND
4 NC
5 GND
6 GND
7 INPUT
8 NC
15 NC
9 NC
16 +VCC
10 NC
17 +VCC
11 GND
18 BV-
12 GND
19 NC
13 NC
20 BØ
14 SHUTDOWN 21 BVB
22 BV+
23 NC
24 AV-
25 NC
26 AØ
27 AVB
28 AV+
1
PRELIMINARY Rev. B 1/11