MA120GQ-Z Datasheet, PDF (10/14 Pages) MPS Industries, Inc. – Angular Sensor for 3-Phase Brushless Motor Commutation

MA120
Angular Sensor for 3-Phase Brushless Motor
Commutation
3. Read back the register 4
command reg. address MSB
value
LSB
0001 0100 00000000
If the programming was correct the MagAlpha
replies with the register 4 content:
Angle out
MSB
value
LSB
A(7:4)
A(3:0) 0 0 1 0 0 0 1 1
4. Connect the VFLASH pin to 3.6 V
5. Flash register 4:
command reg. address MSB
value
LSB
0010 1001 00010000
6. Disconnect the VFLASH pin from 3.6 V.
7. Turn the MagAlpha off and on, and read back
the register 4 to verify that the flashing was
successfully accomplished (steps 3)
Monolithic Power Systems, Inc. | Gland, Switzerland | Tel: [phone] | [e-mail] | www.sensimatech.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2014 Monolithic Power Systems. All Rights
Reserved. MA700 Rev 1.0 September 2014
10