English
Language : 

MB1500ERW Datasheet, PDF (2/4 Pages) MicroPower Direct, LLC – MB1500ERW
Model Selection Guide
www.micropowerdirect.com
Model
Number
Input
Voltage (VDC)
Current (mA)
Voltage
Nominal Range Full-Load No-Load (VDC)
Output
Current
(mA, Max)
Current
(mA, Min)
Efficiency
(%, Typ)
Over
Voltage
Protection
(VDC Typ)
Capacitive
Load
(µF, Max)
Fuse
Rating
Slow-Blow
(mA)
MB1512S-03ERW 12
9.0 - 18.0 1,465
65
3.3
4,000
200
87
3.9 10,500
3,000
MB1512S-05ERW 12
9.0 - 18.0 1,405
60
5.0
3,000
150
89
6.2
4,020
3,000
MB1512S-12ERW 12
9.0 - 18.0 1,405
25
12.0
1,250
63
89
15.0
1,035
3,000
MB1512S-15ERW 12
9.0 - 18.0 1,405
25
15.0
1,000
50
89
18.0
705
3,000
MB1512S-24ERW 12
9.0 - 18.0 1,389
30
24.0
625
32
90
30.0
250
3,000
MB1512D-05ERW 12
9.0 - 18.0 1,453
30
±5.0 ±1,500
±75
86
±6.2 ±1,020
3,000
MB1512D-12ERW 12
9.0 - 18.0 1,420
25 ±12.0
±625
±32
88
±15.0
±495
3,000
MB1512D-15ERW 12
9.0 - 18.0 1,420
25 ±15.0
±500
±25
88
±18.0
±165
3,000
MB1512D-24ERW 12
9.0 - 18.0 1,420
20 ±24.0
±313
±16
88
±30.0
±200
3,000
MB1524S-03ERW 24 18.0 - 36.0 625
35
3.3
4,000
200
88
3.9 10,500
1,500
MB1524S-05ERW 24 18.0 - 36.0 695
35
5.0
3,000
150
90
6.2
4,020
1,500
MB1524S-12ERW 24 18.0 - 36.0 703
20
12.0
1,250
63
89
15.0
1,035
1,500
MB1524S-15ERW 24 18.0 - 36.0 695
20
15.0
1,000
50
90
18.0
705
1,500
MB1524S-24ERW 24 18.0 - 36.0 695
25
24.0
625
32
90
30.0
250
1,500
MB1524D-05ERW 24 18.0 - 36.0 727
25
±5.0 ±1,500
±75
86
±6.2 ±1,020
1,500
MB1524D-12ERW 24 18.0 - 36.0 710
20 ±12.0
±625
±32
88
±15.0
±495
1,500
MB1524D-15ERW 24 18.0 - 36.0 710
20 ±15.0
±500
±25
88
±18.0
±165
1,500
MB1524D-24ERW 24 18.0 - 36.0 710
20 ±24.0
±313
±16
88
±30.0
±200
1,500
MB1548S-03ERW 48 36.0 - 75.0 316
35
3.3
4,000
200
87
3.9 10,500
1,000
MB1548S-05ERW 48 36.0 - 75.0 360
35
5.0
3,000
150
87
6.2
4,020
1,000
MB1548S-12ERW 48 36.0 - 75.0 352
25
12.0
1,250
63
89
15.0
1,035
1,000
MB1548S-15ERW 48 36.0 - 75.0 348
15
15.0
1,000
50
90
18.0
705
1,000
MB1548S-24ERW 48 36.0 - 75.0 352
15
24.0
625
32
89
30.0
250
1,000
MB1548D-05ERW 48 36.0 - 75.0 363
20
±5.0 ±1,500
±75
86
±6.2 ±1,020
1,000
MB1548D-12ERW 48 36.0 - 75.0 355
15 ±12.0
±625
±32
88
±15.0
±495
1,000
MB1548D-15ERW 48 36.0 - 75.0 355
15 ±15.0
±500
±25
88
±18.0
±165
1,000
MB1548D-24ERW 48 36.0 - 75.0 355
15 ±24.0
±313
±16
88
±30.0
±200
1,000
Notes:
1. Start up time is measured at nominal input and with a constant resistive load.
Derating Curve Output Over 5VDC
2. Cross regulation is measured with the output being tested at 50% load. The second output is varied
from 10% to 100% load.
3. When measuring output ripple, it is recommended that an external ceramic capacitor (approx
1 µF to 10 µF) be placed from the +VOUT to the -VOUT pins.
4. Short circuit protection is provided by a “hiccup mode” circuit.
5. Isolation capacitance for 24 VDC output models is 2,000 pF. Isolation capacitance is measured from
input to output at 100 kHz/0.1V.
6. The maximum control current at the on/off pin (pin 6) during a logic high is 50 µA. The maximum
control current to the on/off pin at logic low (-0.7V to 0.8V) is 1 mA. If the on/off pin is left open, the
unit operates. If it is grounded, the unit will shut off.
7. These units should not be operated with a load under 10% of full load. Operation at no-load will not
damage the unit, but they may not meet all specifications.
8. These units should not be operated over +85°C. Exceeding +85°C may damage the unit.
9. It is recommended that a fuse be used on the input of a power supply for protection. See the Model
Selection table above for the correct rating.
External Trim
Derating Curve Output 5VDC & 3.3VDC
On single output units, a simple external circuit may be used to adjust the converter output.
To adjust the output DOWN, connect a 5%, 3W resistor between the plus output pin and
the Vout trim pin. To adjust the output UP, connect a 5%, 3W resistor between the minus
output pin and the Vout trim pin.
For UP/Down trimming capability, connect a 10 kW potentiom-
eter between the plus and minus outputs with the wiper arm
connected to the Vout trim pin.
292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com