IG120 Datasheet, PDF (2/4 Pages) MicroPower Direct, LLC – IG120 SERIES

Model Selection Guide
www.micropowerdirect.com
Model
Number
Input (Supply)
Voltage (VDC)
Nom. Range
Output 1
Voltage (VDC) _Current
Min. Nom. Max. ^{(mA Max)}
Current
(mA, Min)
Output 2
Voltage (VDC) _Current
Min. Nom. Max. ^{(mA Max)}
Current
(mA, Min)
Load
Regulation
(%)
Min. Max.
Maximum
Capacitive
Load
(µF)
Fuse Rating
Slow-Blow
(mA)
IG100-09 15 14.5 - 15.5 8.0 9.0 10.0 111.0 0.0
8.3 15
220
200
IG100-09D 15 14.5 - 15.5 8.0 9.0 10.0 55.0 0.0 -8.0 -9.0 -10.0 55.0 0.0 8.3 15
220
200
IG120-12 12 11.6 - 12.4 14.0 15.0 16.0 80.0 0.0 -7.0 -8.7 -10.0 40.0 0.0 6.3 15
220
400
IG120-12W 12 9.0 - 15.0 14.0 15.0 16.0 100.0 0.0 -7.0 -8.0 -9.0
80.0 0.0
6.3 15
220
500
IG120-15 15 14.5 - 15.5 14.0 15.0 16.0 80.0 0.0 -7.0 -8.7 -10.0 40.0 0.0 6.3 15
220
300
IG136-15 15 14.5 - 15.5 16.5 17.0 18.0 80.0 0.0 -7.0 -8.7 -10.0 40.0 0.0 6.3 15
220
400
IG120-24 24 23.3 - 24.7 14.0 15.0 16.0 80.0 0.0 -7.0 -8.7 -10.0 40.0 0.0 6.3 15
220
200
The IG100 series is designed to
operate with the IGD962 IGBT driver.
Contact the factory for more information
Notes:
1. Load regulation is measured from 10% load to full load. Load regulation is specified
for the primary output (output 1). The load regulation of output 2 may vary slightly.
The typical load regulation for IG100-9 and IG100-9D is 8.3%.
2. Operation at no-load will not damage these units. However, they may not meet all
specifications.
3. If output 2 is not used, it should be left open.
4. It is recommended that a fuse be used on the input of a power supply for protection.
See the Model Selection table above for the correct rating.
Efficiency vs Input Voltage 15 VDC Input
Efficiency vs Output Load 15 VDC Input
Efficiency vs Input Voltage 24 VDC Input
Efficiency vs Output Load 24 VDC Input
292 Page Street Ste D Stoughton, MA 02072 • TEL: [phone] • FAX: [phone] • E-Mail: [e-mail]