MC145572EVK Datasheet, PDF (50/52 Pages) Motorola, Inc – ISDN U-Interface Transceiver Evaluation Kit

Freescale Semiconductor, Inc.
3.2.21 ORL — Read/Write LT U-Interface Transceiver Byte Register
3.2.21.1 FORMAT.
ORL <r>[ dd]<ENTER>
r = 0 Ð 10,12,13; register number in decimal
dd = hex data for write; one or two digits
This command reads or writes any of the 12 overlay registers on the LT side U-Interface Transceiver. Byte
register BR10 is also included in the range of this command since BR10 appears in the overlay register
map. The command defaults to a read of the speciÞed register entered as a decimal number. When one
or two characters of valid hex data follow the register number written to, the speciÞed register is updated
and the updated register contents are echoed to the terminal.
EXAMPLE
NTLT>ORL 6 E0
Enable B1, B2, and D channel time slot assigners
OR 6:E0
Updated OR6 echoed to terminal
NTLT>
Command line prompt
3.2.22 ORN — Read/Write NT U-Interface Transceiver Overlay Register
3.2.22.1 FORMAT.
ORN <r>[ dd]<ENTER>
r = 0 Ð 10,12,13; register number in decimal
dd = hex data for write; one or two digits
This command reads or writes any of the 12 overlay registers on the NT side U-Interface Transceiver. Byte
register BR10 is also included in the range of this command since BR10 appears in the overlay register
map. The command defaults to a read of the speciÞed register entered as a decimal number. When one
or two characters of valid hex data follow the register number written to, the speciÞed register is updated
and the updated register contents are echoed to the terminal.
EXAMPLE
NTLT>ORN 6 E0
Enable B1, B2, and D channel time slot assigners
OR 6:E0
Updated OR6 echoed to terminal
NTLT>
Command line prompt
MOTOROLA
For More Information On This Product,
Go to: www.freescale.com
MC145572EVK
51