MC33592FTA Datasheet, PDF (22/28 Pages) Motorola, Inc – PLL Tuned UHF Receiver for Data Transfer Applications

Freescale Semiconductor, Inc.
ELECTRICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, V_CC=[4.5V;5.5V], operating temperature range T_A=[-40°C;+85°C]. Values refer to
the circuit in recommended in the application schematic (see figure 17), unless otherwise specified. Typical
values reflect average measurement at V_CC=5V, T_A=25°C, using MC33592.
Parameter
Test Conditions, Comments
Limits
Unit
Min. Typ. Max.
4
PLL Divider & Crystal Oscillator
4.1
Maximum Crystal
Series Resistance
-
- 200 W
5
Data Filter & Slicer, Data Manager, SPI
5.1
Data Frequency
OOK modulation, DME=0
1
-
11 kHz
5.2
DR1=0, DR0=0, 1200 bauds
51 73 102 µs
5.3
Low pass filter delay
5.4 ^{2nd order Butterworth response}
DR1=0, DR0=1, 2400 bauds
DR1=1, DR0=0, 4800 bauds
30 42 57 µs
19 25 34 µs
5.5
DR1=1, DR0=1, 9600 bauds
12 16 22 µs
5.6
DR1=0, DR0=0
1.0
-
1.4 kBd
5.7
Data Rate Range
5.8
for Clock Recovery
DR1=0, DR0=1
DR1=1, DR0=0
2
-
2.7 kBd
4
-
5.3 kBd
5.9
DR1=1, DR0=1
8.6
- 10.6 kBd
5.10
5.11
Input Low Voltage
Input High Voltage
Pins MOSI, SCLK, RESETB
0
-
0.3 ´
V_CC
V
0.7 ´
V_CC
-
V_CC
V
5.13
Input Pull Down Current
Pins MOSI, SCLK, RESETB, V_IN=V_CC -
2
-
µA
5.14
5.15
Output Low Voltage
Output High Voltage
Pins MOSI, MISO, SCLK,
|I_LOAD| =10µA
0
0.02
0.2 ´
V_CC
V
0.8 ´
V_CC
4.97
V_CC
V
5.16
Fall/Rise Time
Pins MOSI, MISO, SCLK, C_LOAD =
5pF,
-
from 10% to 90% of the output swing
- 100 ns
5.17
5.18
Input Low Voltage
Input High Voltage
0
-
0.5
V
Pin STROBE used as digital input
4.4
-
V_CC
V
5.19
Input Pull Down Current
Pin STROBE used as digital input,
V_IN=V_CC
-
-
50 µA
5.20
SPI data rate
On MOSI, MISO & SCLK,
SPI master or slave,
see note 7
-
- 310 kBd
22
MC33592 Technical Data
MOTOROLA
For More Information On This Product,
Go to: www.freescale.com