MC34152 Datasheet, PDF (2/10 Pages) ON Semiconductor – HIGH SPEED DUAL MOSFET DRIVERS

MC34152 MC33152
MAXIMUM RATINGS
Rating
Power Supply Voltage
Logic Inputs (Note 1)
Drive Outputs (Note 2)
Totem Pole Sink or Source Current
Diode Clamp Current (Drive Output to VCC)
Power Dissipation and Thermal Characteristics
D Suffix, Plastic Package Case 751
Maximum Power Dissipation @ TA = 50°C
Thermal Resistance, Junction–to–Air
P Suffix, Plastic Package, Case 626
Maximum Power Dissipation @ TA = 50°C
Thermal Resistance, Junction–to–Air
Operating Junction Temperature
Operating Ambient Temperature
Operating Ambient Temperature
MC34152
MC33152
Symbol
Value
Unit
VCC
20
V
Vin
–0.3 to +VCC V
A
IO
1.5
IO(clamp)
1.0
PD
R_θJA
PD
R_θJA
TJ
TA
0.56
180
1.0
100
+150
0 to +70
–40 to +85
W
°C/W
W
°C/W
°C
°C
Storage Temperature Range
Tstg
–65 to +150 °C
ELECTRICAL CHARACTERISTICS (VCC = 12 V, for typical values TA = 25°C, for min/max values TA is the operating ambient
temperature range that applies [Note 3], unless otherwise noted.)
LOGIC INPUTS
Input Threshold Voltage
High State Logic 1
Low State Logic 0
Characteristics
Input Current
High State (VIH = 2.6 V)
Low State (VIL = 0.8 V)
Symbol
VIH
VIL
IIH
IIL
Min
Typ
Max
Unit
V
2.6
1.75
–
–
1.58
0.9
µA
–
100
300
–
20
100
DRIVE OUTPUT
Output Voltage
Low State (Isink = 10 mA)
Low State (Isink = 50 mA)
Low State (Isink = 400 mA)
High State (Isource = 10 mA)
High State (Isource = 50 mA)
High State (Isource = 400 mA)
VOL
VOH
V
–
0.8
1.2
–
1.1
1.5
–
1.8
2.5
10.5
11.2
–
10.4
11.1
–
10
10.8
–
Output Pull–Down Resistor
RPD
–
100
–
kΩ
SWITCHING CHARACTERISTICS (TA = 25°C)
Propagation Delay (CL = 1.0 nF)
Logic Input to:
Drive Output Rise (10% Input to 10% Output)
Drive Output Fall (90% Input to 90% Output)
tPLH _(IN/OUT)
–
tPHL _(IN/OUT)
–
ns
55
120
40
120
Drive Output Rise Time (10% to 90%)
Drive Output Rise Time (10% to 90%)
CL = 1.0 nF
tr
CL = 2.5 nF
–
14
30
ns
–
36
–
Drive Output Fall Time (90% to 10%)
Drive Output Fall Time (90% to 10%)
CL = 1.0 nF
tf
CL = 2.5 nF
–
15
30
ns
–
32
–
TOTAL DEVICE
Power Supply Current
Standby (Logic Inputs Grounded)
Operating (CL = 1.0 nF Drive Outputs 1 and 2, f = 100 kHz)
ICC
mA
–
6.0
8.0
–
10.5
15
Operating Voltage
VCC
6.5
–
18
V
NOTES: 1. For optimum switching speed, the maximum input voltage should be limited to 10 V or VCC, whichever is less.
2. Maximum package power dissipation limits must be observed.
3. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
Tlow = 0°C for MC34152
Tlow = –40°C for MC33152
Thigh = +70°C for MC34152
Thigh = +85°C for MC33152
2
MOTOROLA ANALOG IC DEVICE DATA