English
Language : 

MSS0306-1 Datasheet, PDF (2/19 Pages) Mosel Vitelic, Corp – 3 VOICE ROM
MOSEL VITELIC
MSS0306
Description
The MSS0306 is a monolithic CMOS VLSI ASIC that can memorize voice up to 3.5 seconds (at 6KHz
S.R.) using MOSEL qualified coding method (MPCM-4) in 8 sections. Both the volume and pitch can be
different for each entry each sentence. 3 versatile outputs are available through programmable logic array.
Most of the necessary circuit are built in like oscillator, ROM, DAC and interface logic. Customer voice
data will be edited and built in by mask programming during the device fabrication.
Mask Option
Either LED function or STATUS function for OUT X pin.
Either LED function or STATUS function for OUT Y pin.
Either LED function or STATUS function for OUT Z pin.
Either initial low or inital high for OUT X pin.
Either initial low or inital high for OUT Y pin.
Either initial low or inital high for OUT Z pin.
Among (0) on LED (1) 3Hz Ring (2) dynamic flash (3) 6Hz Ring (4) 12Hz Ring (5) 3Hz fix flash (6) 6Hz fix flash
(7) off LED for LED selection when playing audio for every entry.
Among (0) high busy (1) low busy (2) DC high (3) reserved (4) reserved (5) DC low (6) low stop (7) high stop
for STATUS selection for every entry.
Either TG5 or OKY for TG5/OKY pin.
Either Continuous S.W.A.I. or Home S.W.A.I. for PLAYNEXT selection. S.W.A.I. means sequence when after
interrupt occured.
Either small loop or large loop for OKY cycle.
8 loudness levels 7, 6, 5, 4, 3, 2, 1, 0 for each sentence each entry.
8 different pitches 7, 6, 5, 4, 3, 2, 1, 0 for each sentence each entry.
Either Edge or Level trigger type for TG1 pin.
Either Edge or Level trigger type for TG2 pin.
Either Edge or Level trigger type for TG3 pin.
Either Edge or Level trigger type for TG4 pin.
Either Edge or Level trigger type for TG5/OKY pin.
Either active high or active low for TG1 pin.
Either active high or active low for TG2 pin.
Either active high or active low for TG3 pin.
Either active high or active low for TG4 pin.
Either active high or active low for TG5/OKY pin.
Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG1 pin.
Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG2 pin.
Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG3 pin.
Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG4 pin.
Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG5/OKY pin.
2/19
PID239 05/96