URF1D12HB-150W Datasheet, PDF (1/8 Pages) MORNSUN Science& Technology Ltd. – Wide input voltage range

DC/DC Converter
URF1D_HB-150W Series
150W, wide input voltage, isolated & regulated
single output DC-DC converter
FEATURES
 Wide input voltage range: 50-160V
 High efficiency up to 91%
 No-load power consumption as low as 3mA
 Isolation voltage 3000VDC
 Operating temperature range:-40℃~+100℃
 Input under-voltage protection, output
over-voltage, over-current, short circuit,
over-temperature protection
 International standard: 1/2 brick
Patent Protection RoHS
 Meets requirements of railway standard
EN50155
URF1D_HB-150W (H) series is a high performance product designed for the field of railway applications. Output power up to 150W, no min
load requirement, wide input voltage 50-160VDC, which allows the base plate operating temperature up to 100℃. Further product feathers
include input under-voltage protection, output over-voltage protection, short circuit protection, over current protection, over temperature
protection, remote control and compensated, output voltage regulation functions. Meets the EN50155 railway standard. Widely used in the
railway system and associated equipment.
Selection Guide
Input Voltage (VDC)
Part No.
Nominal (Range) Max.^*
Output
Output
Output Current
Voltage(VDC) (mA)(Max./Min.)
Efficiency (%, Min./Typ)
@ Full Load
URF1D12HB-150W
(66-160)
(50-66)
12500/0
12
10000/0
87/89
URF1D12HB-150WH
(66-160)
(50-66)
12500/0
12
10000/0
87/89
(66-160)
URF1D15HB-150W
15
(50-66)
110
170
(66-160)
URF1D15HB-150WH
15
(50-66)
10000/0
8000/0
10000/0
8000/0
87/89
87/89
URF1D24HB-150W
(66-160)
(50-66)
6250/0
24
5000/0
89/91
URF1D24HB-150WH
(66-160)
(50-66)
6250/0
24
5000/0
89/91
Note: *Exceeding the maximum input voltage may cause permanent damage.
Max. Capacitive
Load(µF)
10000
10000
6800
6800
4400
4400
Input Specifications
Item
Operating Conditions
Input Current (full load / no-load) Nominal input
Reflected Ripple Current
Nominal input
Input impulse Voltage (1sec. max.)
Starting Voltage
Under-voltage Shutdown Voltage
Start-up Time
Input Filter
Module switch on
Ctrl*
Module switch off
Input current when switched off
Hot Plug
Note: * the voltage of Ctrl pin is relative to input pin -Vin.
Min.
Typ.
Max.
Unit
--
1495/3
1532/10
mA
--
80
--
-0.7
--
180
--
47
50
VDC
35
43
50
--
25
--
mS
Pi filter
Ctrl psuspended or connected to TTL high level (3.5-12VDC)
Ctrl connected to -Vin or low level (0-1.2VDC)
--
2
5
mA
Unavailable
2016.01.31-A/1
Page 1 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation