63811-6000 Datasheet, PDF (1/5 Pages) Molex Electronics Ltd. – Hand Crimp Tool Specification Sheet

Hand Crimp Tool for 1.50mm (.591") Pitch, MX150 Crimp Terminals
Hand Crimp Tool
Specification Sheet
Order No. 63811-6000
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
TYPE 4A
SCOPE
Products: 1.50mm (.591") Pitch, MX150 Receptacle Female Crimp Terminals, 18-22 AWG.
Terminal
Series No.
Terminal Order No.
●Reel
Wire Size Insulation Diameter Strip Length
AWG mm² mm
In.
mm
In.
33001
33001-2004 33001-2022 33001-4002 33001-5002 18 0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220
33001-3004 33001-3022 33001-4022 33001-5022 20 0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
33001-2005 33001-2023 33001-3005 33001-3023
33001-4003 33001-4023 33001-5003 33001-5023
22
0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
33012
33012-2002 33012-2022 33012-3002 33012-3022 ^{18 0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220}
20 0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
33012-2003 33012-2023 33012-3003 33012-3023 22 0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
34750 ^{34750-0002 34750-1002}
18 0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220
20 0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
34750-0003 34750-1003
22 0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
●Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.
Terminals were validated per USCAR-21 using the following wire specifications:
M1L-123A (TXL), M1L-135A1 (UTX), and M1L-126A1 (metric-TXL).
Customers are required to complete validation testing if tooling purchased outside Molex Inc.
and / or wire specifications are different than above.
DEFINITION OF TERMS
BEND UP
BRUSH
WIRE BEND
ROLLING
TWISTING
BEND
DOWN
WIRE BRUSH MUST BE
0.30
FLUSH OR BELOW TOP
OF CONDUCTOR CRIMP
STRIP LENGTH
CUT-OFF
TAB
WIRE BEND
BELL MOUTH
SEAM
INSULATION
CRIMP
THIS AREA
TERMINAL WIDTH
NOT TO EXCEED
2.65mm AFTER CRIMP
CRIMP
HEIGHT
CONDUCTOR
CRIMP
Doc No: ATS-638116000
Revision: E
Release Date: 03-21-06
Revision Date: 10-01-09
UNCONTROLLED COPY
Page 1 of 5