63811-2600 Datasheet, PDF (1/5 Pages) Molex Electronics Ltd. – Hand Crimp Tool Specification Sheet

Hand Crimp Tool for MX150 Blade Crimp Terminals
Hand Crimp Tool
Specification Sheet
Order No. 63811-2600
FEATURES
TYPE 4A
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
SCOPE
Products: 1.50mm (.591") Pitch, MX150 Blade Male Crimp Terminals, 18-22 AWG.
Terminal Series No.
Terminal Order No.
●Reel
Wire Size Insulation Diameter
AWG mm² mm
In.
Strip Length
mm
In.
33000
33000-0002 33000-1002
18
20
0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220
0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
33000-0003 33000-1003 22 0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
33011
33011-0002
33011-0003
33011-0004
33011-1002
33011-1004
33011-2002
33011-3002
18
20
0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220
0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
33011-0005 33011-0006
33011-1006 33011-2001 22 0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
33011-3001
31296
31296-0004 31296-1004 18 0.83 1.91-2.06 .075-.081 4.70-5.60 .185-.220
31296-0008 31296-1008 20 0.58 1.70-1.85 .067-.073 4.70-5.60 .185-.220
31296-0006
22 0.36 1.50-1.65 .059-.065 4.70-5.60 .185-.220
●Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.
Terminals were validated per USCAR-21 using the following wire specifications:
M1L-123A (TXL), M1L-135A1 (UTX), and M1L-126A1 (metric-TXL).
Customers are required to complete validation testing if tooling purchased outside Molex Inc.
and/or wire specifications are different than above.
Doc No: ATS-638112600 Release Date: 01-21-03
Revision: E
Revision Date: 08-31-09
UNCONTROLLED COPY
Page 1 of 5