63819-4800 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.

Hand Crimp Tool 1.20mm (.047”) Pitch Pico-EZmate™ Crimp Terminals
HAND CRIMP TOOL
SPECIFICATION SHEET
Order No. 63819-4800
FEATURES
TYPE 7
% A full cycle ratcheting hand tool ensures complete crimps
% This tool is designed to be used with reeled product due to the small size of the connector
% This tool is designed for prototype work only and is not designed for production
% The reeled product must be cut into 5-inch strips to be processed in this hand tool
% This tool is IPC/WHMA A-620 Class 2 compliant as indicated
% This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 1.20mm (.047”) Pitch Pico-EZmate™ Wire-to-Board Crimp Terminal, 28 AWG.
Terminal
Series No.
78172
Terminal Order No. Wire Size
Reel Form Only
Insulation Diameter
IPC/WHMA-A620
Terminal
AWG mm² mm
In.
mm
In.
Strip Length
mm
In.
78172-0410
78172-0411
28 0.08 0.55-0.70 .022-.028 0.55-0.70 .022-.028 0.90-1.30 .035-.051
To achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
Overall insulation OD specification for terminal.
Customer to cut off terminal from reel: 0.05mm (.002”) maximum Cut-off Tab.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
INSULATION
CRIMP
CONDUCTOR
CRIMP
BEND UP
ROLLING
STRIP
LENGTH
TWISTING
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-6381948000 Release Date: 08-17-09
Revision: A
Revision Date: 08-17-09
UNCONTROLLED COPY
Page 1 of 6