0638239875 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 2.00mm (.079") Pitch Wire-to-Board Crimp Terminal
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63823-9800
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is IPC/WHMA A-620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 2.00mm (.079") Pitch Wire-to-Board Crimp Terminal, 22 - 26 AWG.
Terminal
Series No.
503657
Terminal Order No.
Wire Size Insulation Diameter Strip Length
Loose
●Reel AWG mm² mm
In.
mm
In.
503657-1100 503657-1000 22-26 0.3-0.2 0.90-1.50 .035-.059 1.90-2.10 .075-.098
● Customer to cut off terminal from reel: 0.10mm (.004”) maximum Cut-off Tab.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
BEND UP
ROLLING
STRIP
LENGTH
TWISTING
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638239800 Release Date: 04-04-11
Revision: A
Revision Date: 04-04-11
UNCONTROLLED COPY
Page 1 of 7