0638132300 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Extractor Tool Instruction Sheet

Extractor Tool for 1.50mm (.059") CP Crimp Terminals
Extractor Tool
Instruction Sheet
Order No. 63813-2300
FEATURES
This Extractor Tool is for the removal of 98915 & 64323 Series female terminals from CMC connector.
SCOPE
Products: 1.50mm (.059") CP Crimp Terminal for CMC connector.
Terminal Series No.
98915
64323
Terminal Order No.
98915-1029
98915-1039
98915-1219
98915-1319
64323-1029
64323-1039
64323-1219
64323-1319
OPERATION:
When removing a damaged crimped wire from the CMC connector follow the steps below:
1. The secondary lock on the CMC connector will need to be opened first. See Figure 1.
2. Using a screwdriver insert the flat edge under the tab of the secondary lock and pull up. Use your fingers
to open the lock completely.
SECONDARY LOCK
WIRE
SCREWDRIVER
Figure 1
CMC
CONNECTOR
Doc No: ATS-638132300 Release Date: 04-11-07
Revision: B
Revision Date: 01-27-09
UNCONTROLLED COPY
Page 1 of 2