03-09-1031 Datasheet, PDF (2/3 Pages) Molex Electronics Ltd. – PLUG AND RECEPTACLE POWER CONNECTORS

PRODUCT SPECIFICATION
2.3 SAFETY AGENCY APPROVALS
UL File #E29179
CSA File #E29179
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
See the appropriate sales drawings for necessary referenced documents and specifications.
4.0 RATINGS
4.1 VOLTAGE
250 Volts AC (RMS)
4.2 CURRENT AND APPLICABLE WIRES
AWG Circuit Size
Amps
14
3
14
14
9
11
18
3
10
18
9
7
22
3
7
22
9
5
4.3 TEMPERATURE
Operating: - 55°C to + 105°C
5.0 PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION
Contact
Mate connectors: apply a maximum voltage
1
Resistance
of 20 mV and a current of 20 mA.
(Low Level)
(Measurement locations in Section 7.0)
Dielectric
Mate connectors: apply a voltage of 2000
2
Withstanding
VAC for 1 minute between adjacent
Voltage
terminals and between terminals to ground.
Mate connectors, measuring the temperature
rise at 60 minute intervals during 96 hours of
steady state at rated current; followed by 240
Temperature
hours of current cycling (45 minutes ON and
3
Rise
15 minutes OFF per hour) with
(via Current Cycling) measurements made during last 5 minute
period of each ON cycle; followed by 96
hours of steady state at rated current with
measurements taken at 60 minute intervals.
REQUIREMENT
10 milliohms
MAXIMUM
[initial]
No breakdown;
current leakage < 500 mA
Temperature rise:
+30°C MAXIMUM
REVISION: ECR/ECN INFORMATION:
B
EC No:UCR#2003-0230
DATE:2002 / 08/ 07
DOCUMENT NUMBER:
PS-43660-9999
TITLE:
PRODUCT SPECIFICATION
STANDARD .093 SERIES
PLUGS & RECEPTACLES
CREATED / REVISED BY:
CHECKED BY:
BWIRKUS 10/4/01
BWIRKUS 10/4/01
SHEET No.
2 of 3
APPROVED BY:
SFRY 10/5/01
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC