MVJL_12 Datasheet, PDF (2/2 Pages) MMD Components – MVJL/MVJP Series PECL/LCPECL VCXO

Part Number Guide
Ceramic SMD 6 J-Leads
MVJ
1
Frequency
Supply Voltage
P = PECL (+5.0VDC)
L = LVPECL (+3.3VDC)
Frequency
Stability
Operating Temperature
Pullability**
020 = ±20 ppm
025 = ±25 ppm
Blank = 0°C to +70°C
27 = -20°C to +70°C
Symmetry *
Blank = 40/60%
A = ±200 ppm
C = ±100 ppm
050 = ±50 ppm
100 = ±100 ppm
48 = -40°C to +85°C
55 = -55°C to +125°C
A = 45/55%
B = 47.5/52.5%
D = ±50 ppm
P = ±25 ppm
*Option B (47.5/52.5%) Available up to 500MHz only
**200ppm Pullability not available with 3.3V Supply
Please Consult with MMD sales department for any other parameters or options.
Value Added Options
Blank = Bulk
T = Tape & Reel
Jitter
1 = Less than 1 pSec Jitter
Mechanical Details
9.80 [.386]
MAX
4.70 [.185]
MAX
0.84 [.033]
14.00 [.551]
MAX
5.08 [.200]
2.54 [.100]
DENOTES PIN 1
PIN 1 INDICATOR
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
3
4
2
5
1
6
7.87 [.310]
5.08 [.200]
1.02 [.040]
2.54 [.100]
2.50 [.098]
Suggested
Land Pattern
PIN CONNECTIONS
PIN 1 VOLTAGE CONTROL
PIN 2 ENABLE/DISABLE
PIN 3 GROUND
PIN 4 OUTPUT
PIN 5 COMP. OUTPUT
PIN 6 SUPPLY VOLTAGE
Tape & Reel Dimensions
PITCH
Tape Width
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
DIRECTION OF FEED
REEL DIA
PITCH
TAPE WIDTH
REEL DIA
PIN 1 ORIENT.
COUNT
12.00 [.471]
24.00 [.945]
330 [13.0]
Q1
500
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Revisions only with customer approval
Revision:
08/31/11 E
Pg 2 of 2