MVJL_12 Datasheet, PDF (1/2 Pages) MMD Components – MVJL/MVJP Series PECL/LCPECL VCXO

MVJL/MVJP Series PECL/LCPECL VCXO
 Hermetically Sealed Ceramic SMD Package
 Wide Frequency Range
 Available to -55°C to +125°C Operating
 Less than 1 pSec Jitter
Frequency Range
Frequency Stability (Inclusive of Temp., Load and Voltage)
Aging
Operating Temp.Range
Storage Temp. Range
Supply Voltage (Vdd)
Supply Current
Control Voltage
Logic “0”
Logic “1”
Symmetry (50% of waveform)
Load
Rise / Fall Time (20% to 80%)
Start Time
Jitter (RMS)
Linearity
Pullability
Tri-State Operation
70.000 MHz to 622.080 MHz
(See Part Number Guide for Options)
±5 ppm / yr max
(See Part Number Guide for Options)
-55°C to +125°C
+3.3 VDC ±5% (LVPECL)
+5.0 VDC ±5% (PECL)
60mA
85mA
+1.65VDC ±1.50VDC
+2.50VDC ±2.00VDC
Vdd – 1.620 Vdc max
Vdd- 1.025 Vdc min
(See Part Number Guide for Options)
50 Ohms into Vdd-2.00 VDC
5nSec max
5mSec max
Less than 1 pSec
±10% max
(See Part Number Guide for Options)
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% max or grounded to Disable, Output
(High Impedance)
Environmental & Mechanical Detail
Marking Detail
Humidty
Hermetic Seal
Solderability
Reflow Solderability
Vibration
Shock
MIL-STD-883
85% RH, 85°C, 48 Hours
Leak Rate 2 X 10^-8 ATM-cm³/sec max
MIL-STD-202G, Method 208
260°C for 10 seconds
MIL-STD-202G, Method 204 35G, 50 to
2000 Hz
MIL-STD-202G, Method 203 Test Cond E,
1000G’s, ½ Sinewave
Available with Level B Screening
Line 1 = MXXXXX
M = MMD
XXXXX = Frequency in MHZ
Line 2 = SYYWWL
S = Internal Code
YYWW
=
4 Digit Date Code
(Year / Week)
L = Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Pin 1 Indicator
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Revisions only with customer approval
Revision:
08/31/11 E
Pg 1 of 2