MUV_12 Datasheet, PDF (2/2 Pages) MMD Components – MUV Series 5X3.2 Ceramic SMD Oscillator

Part Number Guide
5 x 3.2 Ceramic SMD 6 Pads
MU
V
Frequency
Output
V = LVDS
Supply Voltage
2 = +2.50 VDC
3 = +3.30 VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Symmetry
Blank = 40%/60%
A = 45%/55%
Pin 1 Connection
Blank = No Connection
H = Tri-state
Please Consult with MMD Sales Department for any other Parameters or Options
Packaging
Blank = Bulk
T = Tape and Reel
Mechanical Details
5.15 [.203]
MAX
MXX.XXX
SYYWWL
1.30 [.051]
3.35 [.132]
MAX
1.27 [.050]
2.54 [.100]
4
5
6
1.00 [.039]
3
2
1
PIN 1 DESIGNATOR LOCATED IN THIS AREA.
0.64 [.025]
DIMENSION IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
1.27 [.050]
2.54 [.100]
1.40 [.055]
1.00 [.039]
RECOMMENDED
LAND PATTERN
0.80 [.031]
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN CONNECTIONS
TRI-STATE OR NO CONNECTION
NO CONNECTION
CASE GROUND
OUTPUT
COMPLEMENTARY OUTPUT
SUPPLY VOLTAGE
Tape & Reel Dimensions
PITCH
TAPE WIDTH
REEL DIA
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
8.00 [.315]
16.00 [.630]
180[7 IN]
1000
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters.
3. Tolerances are ±0.10 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Subject to change without notice
Revision:
03/01/11 C
Pg 2 of 2