MWC Datasheet, PDF (1/2 Pages) MERITEK ELECTRONICS CORPORATION – Snap-In Aluminum Electrolytic Capacitors

MWC Series – 2.0 x 1.6 Oscillator Specification
ELECTRICAL SPECIFICATION:
¾ 2.0 X 1.6 SMT Package
¾ CMOS Output
¾ Tri-state Option
¾ Tape and Reel Packaging Available
Frequency Range
Temperature Stability (Inslusie of Temperature, Load, Voltage,
and Aging)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V_DD) ±10%
Supply Current
Output
Logic “0”
Logic “1”
Symmetry (50% of waveform)
Rise and Fall Time (20% to 80% of waveform)
Load
Start Up Time
Tri-state Operation
1.000MHZ to 80.000MHZ
(See part Number Guide for Options)
(See part Number Guide for Options)
-40ºC to +85ºC
+1.80 VDC
+2.50 VDC
+3.30 VDC
4 mA max
4 mA max
4 mA max
CMOS
Less than 10% of Supply Voltage
Greater than 90% Supply Voltage
(See part Number Guide for Options)
6 nSec
15pF
10 msec
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% of Vdd max or grounded to Disable Output (High
Impedance)
PART NUMBER GUIDE:
2.0 x 1.6 Ceramic SMD 4 Pads
MW C
Frequency
Output
C = CMOS
Supply Voltage
1 = +1.80 VDC
2 = +2.50 VDC
3 = +3.30 VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Symmetry
Blank = 40%/60%
A = 45%/55%
Pin 1 Connection
Blank = No Connection
H = Tri-state
Please Consult with MMD Sales Department for any other Parameters or Options
Packaging
Blank = Bulk
T = Tape and Reel
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
In the event of conflict, the requirements of this specification shall govern
Specification Subject to change without notice
Revision:
Pb RoHS
Free Compliant
MWC111509A
Page 1 of 2