M37736EHBXXXGP Datasheet, PDF (9/33 Pages) Mitsubishi Electric Semiconductor – PROM VERSION OF M37736MHBXXXGP(MICROCOMPUTERS)

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37736EHBXXXGP
M37736EHBGS
PROM VERSION OF M37736MHBXXXGP
SAFETY INSTRUCTIONS
(1) Sunlight and fluorescent lamp contain light that can erase written
information. When using in read mode, be sure to cover the
transparent glass portion with a seal or other materials (ceramic
package product).
(2) Mitsubishi Electric corp. provides the seal for covering the
transparent glass. Take care that the seal does not touch the read
pins (ceramic package product).
(3) Clean the transparent glass before erasing. Fingers’ fat and paste
disturb the passage of ultraviolet rays and may affect badly the
erasure capability (ceramic package product).
(4) A high voltage is used for programming. Take care that over-
voltage is not applied. Take care especially at power on.
(5) The programmable M37736EHBGP that is shipped in blank is
also provided. For the M37736EHBGP, Mitsubishi Electric corp.
does not perform PROM programming test and screening following
the assembly processes. To improve reliability after programming,
performing programming and test according to the flow below
before use is recommended.
ADDRESSING MODES
The M37736EHBXXXGP has 28 powerful addressing modes. Refer
to the “7700 Family Software Manual” for the details.
MACHINE INSTRUCTION LIST
The M37736EHBXXXGP has 103 machine instructions. Refer to the
“7700 Family Software Manual” for the details.
DATA REQUIRED FOR PROM ORDERING
Please send the following data for writing to PROM.
(1) M37736EHBXXXGP writing to PROM order confirmation form
(2) 100P6S mark specification form
(3) ROM data (EPROM 3 sets)
Programming with PROM programmer
Screening
(Caution)
(Leave at 150 °C for 40 hours)
Verify test with PROM programmer
Function check in target device
Caution : Never expose to 150 °C exceeding 100 hours.
9