M37702M2L Datasheet, PDF (8/20 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
M37702M2LXXXGP, M37702S1LGP
M37702M2LXXXHP, M37702S1LHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Conditions
Ratings
Unit
VCC
Supply voltage
–0.3 to 7
V
AVCC
VI
Analog supply voltage
______
Input voltage RESET, CNVSS, BYTE
–0.3 to 7
V
–0.3 to 12
V
VI
Input voltage P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P57, P60–P67, P70–P77,
P80–P87, VREF, XIN
–0.3 to VCC+0.3
V
VO
Output voltage P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P_{_} 57, P60–P67, P70–P77,
P80–P87, XOUT, E
–0.3 to VCC+0.3
V
Pd
Power dissipation
Ta = 25 °C
300 (Note 1)
mW
Topr
Operating temperature
–40 to 85
°C
Tstg
Storage temperature
–65 to 150
°C
Note 1. In the case of M37702M2LXXXHP and M37702S1LHP, the rating of power dissipation is 200 mW.
RECOMMENDED OPERATING CONDITIONS (VCC = 2.7 to 5.5 V, Ta = –40 to 85 °C, unless otherwise noted)
Symbol
Parameter
Limits
Unit
Min.
Typ.
Max.
VCC
Supply voltage
2.7
5.5
V
AVCC
Analog supply voltage
VCC
V
VSS
Supply voltage
0
V
AVSS
Analog supply voltage
0
V
VIH
High-level input voltage
P00–P07, P30–P33, P40–P47, P50–_{_}P_{_}5_{_}7_{_},_{__}
P60–P67, P70–P77, P80–P87, XIN, RESET,
CNVSS, BYTE
0.8VCC
VCC
V
VIH
High-level input voltage
P10–P17, P20–P27
(in single-chip mode)
0.8VCC
VCC
V
VIH
High-level input voltage
P10–P17, P20–P27
(in memory expansion mode and micro-
processor mode)
0.5VCC
VCC
V
VIL
Low-level input voltage
P00–P07, P30–P33, P40–P47, P50–_{_}P_{_}5_{_}7_{_},_{__}
0
P60–P67, P70–P77, P80–P87, XIN, RESET,
CNVSS, BYTE
0.2VCC
V
VIL
Low-level input voltage
P10–P17, P20–P27
(in single-chip mode)
0
0.2VCC
V
VIL
Low-level input voltage
P10–P17, P20–P27
0
(in memory expansion mode and micro-
processor mode)
0.16VCC
V
IOH(peak)
High-level peak output current
P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P57, P60–P67, P70–P77,
P80–P87
–10
mA
IOH(avg)
High-level average output current P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P57, P60–P67, P70–P77,
P80–P87
–5
mA
IOL(peak)
Low-level peak output current
P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P57, P60–P67, P70–P77,
P80–P87
10
mA
IOL(avg)
Low-level average output current P00–P07, P10–P17, P20–P27, P30–P33,
P40–P47, P50–P57, P60–P67, P70–P77,
P80–P87
5
mA
f(XIN)
External clock frequency input
8
MHz
Note 2. Average output current is the average value of a 100 ms interval.
3. The sum of IOL(peak) for ports P0, P1, P2, P3, and P8 must be 80 mA or less, the sum of IOH(peak) for ports P0, P1, P2, P3, and P8
must be 80 mA or less, the sum of IOL(peak) for ports P4, P5, P6, and P7 must be 80 mA or less, and the sum of IOH(peak) for ports
P4, P5, P6, and P7 must be 80 mA or less.
8